Руководство По Работе для Panasonic KYT935XLEPG

EN-

45

Electrical work must be performed by a legally qualified electrician.

Electrical Requirements

Installation of the Earth Leakage Circuit Breaker

 

■ This appliance must be supplied with the proper voltage and frequency, and 

connected to an individual, properly earthed branch circuit, protected by a 

circuit breaker or fuse. (The rating plate is on the bottom of the appliance.)

 

■ This appliance is not fitted with other means for disconnection from the supply 

mains having a contact separation in all poles that provide full disconnection 

under overvoltage category III conditions. Means for disconnection must be 

incorporated in the fixed wiring in accordance with the wiring rules.

 

■ Single-phase A.C. 220-240 V, 50 Hz electrical system must be used. (It is also 

possible to use a three-phase electrical system.) If connecting to aluminium 

wiring, use connectors approved for use with aluminium wiring.

 

■ Check with the local utilities for electrical codes applied in the area. Failure to 

wire the appliance according to governing codes may result in a hazardous 

condition. 

 

■ After installation, show the customer where the breaker for the appliance is 

located.

 

■ In accordance with the electrical wiring rules, incorporate the earth leakage 

circuit breaker in the home electrical wire.

 

■ Follow the specification of the earth leakage circuit breaker as follows. 

Rated current: 50 A*, rated sensitivity current: 30 mA 

*  If rated current is 40 A, please change to 7200 W under “Power Management” 

in settings. (See page 11)