Руководство По Работе для Panasonic KXTGM450
Using the base unit
When a call is being received, the SP-PHONE
indicator (Z) flashes rapidly.
Additionally, the message indicator flashes
rapidly if the base unit message indicator’s
“Incoming call” setting is enabled
(page 28).
indicator (Z) flashes rapidly.
Additionally, the message indicator flashes
rapidly if the base unit message indicator’s
“Incoming call” setting is enabled
(page 28).
1
Press MZN when the unit rings.
2
Speak into the microphone.
3
When you finish talking, press MZN.
Note:
R While on a call, you can switch from the
R While on a call, you can switch from the
base unit to the handset:
– Press MTALKN on the handset, then
– Press MTALKN on the handset, then
press MZN on the base unit with the call
sharing mode on (page 47).
sharing mode on (page 47).
– If the handset is on the base unit, simply
lift it.
Adjusting the ringer volume
Handset
Press MjN or MkN on the side repeatedly to
select the desired volume.
R To turn the ringer off, press MkN repeatedly.
select the desired volume.
R To turn the ringer off, press MkN repeatedly.
Base unit
Press MjN or MkN repeatedly to select the
desired volume.
R To turn the ringer off, press and hold MkN
desired volume.
R To turn the ringer off, press and hold MkN
until the base unit beeps.
One-touch ringer off
Handset
Press and hold 0 until the handset beeps to
turn the ringer off. While the ringer is turned
off, the handset will not ring for calls.
R You can turn the ringer on again by
turn the ringer off. While the ringer is turned
off, the handset will not ring for calls.
R You can turn the ringer on again by
pressing and holding 0 until the handset
beeps.
beeps.
Base unit
Press MRINGER OFFN to turn the ringer off.
While the ringer is turned off, the base unit will
not ring for calls.
While the ringer is turned off, the base unit will
not ring for calls.
R The RINGER OFF indicator is lit while the
ringer is turned off.
R You can turn the ringer on again by
pressing MRINGER OFFN.
Useful features during
a call
a call
Hold
1
Press MMENUN during an outside call.
2
MbN: “Hold” a MSELECTN
3
To release hold, press MTALKN.
R Another handset user can take the call
R Another handset user can take the call
by pressing MTALKN.
R The base unit user can take the call by
pressing MZN.
Note:
R While an outside call is on hold, the
R While an outside call is on hold, the
SP-PHONE indicator (Z) on the base unit
flashes.
flashes.
R After holding for 10 minutes, the call is
disconnected.
Mute
Handset
1
Press MMUTEN during a call.
2
To return to the call, press MMUTEN.
Note:
R MMUTEN is a soft key visible on the display
R MMUTEN is a soft key visible on the display
during a call.
Base unit
1
Press MERASE/MUTEN during a call.
R The SP-PHONE indicator (Z) flashes.
R The SP-PHONE indicator (Z) flashes.
2
To return to the call, press MERASE/
MUTEN.
MUTEN.
For assistance, please visit http://shop.panasonic.com/support
33
Making/Answering Calls
TGM420_450(en)_0426_ver031.pdf 33
2016/04/26 10:55:38