Инструкция С Настройками для Panasonic PT-L735NTE
25
Network setting
To wirelessly connect the personal computer to the projector without using Simple
Connection, network settings are required as described below.
Connection, network settings are required as described below.
Use of inter-PC communications
If the communication mode of 802.11 ad hoc (peer-to-peer) is selected:
Since the communication mode of 802.11 ad hoc (peer-to-peer) is selected on
shipping of the projector, make due settings on the personal computer side with
reference to the above data.
To use the WEP functions, make the identical settings both for the projector and the
personal computer.
Some wireless cards may not be applicable to this mode; use a card that is
compatible to 802.11 ad hoc (peer-to-peer).
shipping of the projector, make due settings on the personal computer side with
reference to the above data.
To use the WEP functions, make the identical settings both for the projector and the
personal computer.
Some wireless cards may not be applicable to this mode; use a card that is
compatible to 802.11 ad hoc (peer-to-peer).
Setting item
Settings on the projector
Settings on the personal computer
(on shipping) (for Simple Connection)
SSID
Panasonic
Projector
Panasonic
Projector
Communicate mode
802.11 ad hoc
802.11 ad hoc (peer-to-peer)
IP address
192.168.10.10 - 12
192.168.10.21 - 40
(LAN1 - LAN3)
Subnet mask
255.255.255.0
255.255.255.0
Channel
11
Unnecessary (automatic setting)
WEP (encryption)
None
None
Note:
• The above channel setting of the projector is a default one and is not one which
• The above channel setting of the projector is a default one and is not one which
has been designated to connect the projector and PC.