Инструкция С Настройками для Panasonic PT-L735NTE
48
Operation of Web browser control
Starting Web browser control
Start the browser (Microsoft Internet Explorer is used as an example here), and enter
the IP address assigned to the projector.
Start the browser (Microsoft Internet Explorer is used as an example here), and enter
the IP address assigned to the projector.
Web browser control will be started.
Top screen
Note:
Web browser control can also be started from Wireless Manager 3.0.
While Wireless Manager 3.0 is running, right-click the icon shown on the task bar,
select and left-click Remote Control.The Web browser control can also be started
by pressing the [CTRL] + [H] buttons at the same time.
Web browser control can also be started from Wireless Manager 3.0.
While Wireless Manager 3.0 is running, right-click the icon shown on the task bar,
select and left-click Remote Control.The Web browser control can also be started
by pressing the [CTRL] + [H] buttons at the same time.
Note:
• In case you forget the password, assign a new password to the projector (For
• In case you forget the password, assign a new password to the projector (For
security reason, the projector does not show the password that you have been
using).
using).
• The top screen may not be displayed depending on the browser. In that case,
close the window first and start again the Web browser control, or press the
[CTRL] + [R] buttons at the same time.
[CTRL] + [R] buttons at the same time.
Use of Web browser control
Make setting so that the proxy server will not
be used.
(To use the proxy server, see page 47.)
be used.
(To use the proxy server, see page 47.)
Specify the IP address that has been assigned
to the projector in the network setting.
to the projector in the network setting.
Select Japanese or English.
Enter the password if any has been defined.