Руководство По Работе для Panasonic KXMB2061E

CLASS 1 LASER PRODUCT

R The printer of this unit utilises a laser. Use of controls

or adjustments or performance of procedures other
than those specified herein may result in hazardous
radiation exposure.

Laser diode properties
Laser output : Max. 15 mW
Wavelength : 760 nm - 800 nm
Emission duration : Continuous

CLASS 1 LED PRODUCT

R Do not view directly with optical instruments.

CIS’s LED light properties
LED radiation output : Max. 1 mW
Wavelength :

Red 630 nm typical
Green 520 nm typical
Blue 465 nm typical

Emission duration : Continuous

Fuser unit
R During or immediately after printing, the fuser unit

(A) gets hot. This is normal. Do not touch the fuser
unit.

Note:
R The area near the output tray (B) may also get warm.

This is normal.

B

A

Toner cartridge and drum cartridge
R When replacing the toner cartridge or drum cartridge,

do not allow dust, water, or liquids to come in contact
with the drum. This may affect print quality.

R For optimal performance, genuine Panasonic toner

cartridges and drum cartridges are recommended.
We cannot be responsible for problems that may be
caused by a non-Panasonic toner cartridge or drum
cartridge:
– Damage to the unit
– Poor print quality
– Improper operation

Toner cartridge
R Do not leave the toner cartridge out of the protective

bag for a long time. It will decrease the toner life.

Drum cartridge
R Read the instructions on page 12 before you begin

installation of the drum cartridge. After you have read
them, open the drum cartridge protective bag. The
drum cartridge contains a photosensitive drum.
Exposing it to light may damage the drum. Once you
have opened the protective bag:
– Do not expose the drum cartridge to light for more

than 5 minutes.

– Do not touch or scratch the black drum surface.
– Do not place the drum cartridge near dust or dirt,

or in a high humidity area.

– Do not expose the drum cartridge to direct

sunlight.

R To extend the life of the drum cartridge, the power

switch should never be turned OFF immediately after
printing. Leave the power turned ON for a minimum
of 30 minutes after printing.

Location
R To avoid malfunction, do not position the unit near

appliances such as TVs or speakers which generate
an intense magnetic field.

Static electricity
R To prevent static electricity damage to the interface

connectors or other electrical components inside the
unit, touch a grounded metal surface before touching
the components.

Environment
R Keep the unit away from electrical noise generating

devices, such as fluorescent lamps and motors.

R The unit should be kept free from dust, high

temperature and vibration.

R The unit should not be exposed to direct sunlight.
R Do not place heavy objects on top of the unit. When

you leave the unit unused for a long period of time,
unplug this unit from the power outlet.

3