Руководство По Работе для Panasonic DMR-EX85

Dynamic Range Compression

Audio Mode for XP Recording

Bilingual Audio Selection

Digital Audio Output

Dolby Digital

Off

M1

PCM Down Conversion

MPEG

Dolby Digital

PCM

Off

Bitstream

Digital Audio Output

DTS

Bitstream

Bitstream

Dolby Digital

PCM

DVB Preferred Subtitles

On-Screen Messages

Grey Background

English

5 sec.

On

FL Display

Bright

Audio Mode for DV Input

Stereo 1

TAB

SELECT

RETURN

ENTER

TAB

SELECT

RETURN

ENTER

RETURN

SELECT

Tuning
Disc
Picture
Sound
Display
Connection
Others

Tuning
Disc
Picture
Sound
Display
Connection
Others

Tuning
Disc
Picture
Sound

Display

Connection
Others

New Service Message

Automatic

On: The level of quieter passages increases and the level of louder passages 
decreases. The audio can be clearly understood even when the volume is lowered.

If you want to record programmes that are broadcast in dual-channel sound, you can
select between the original language [M1] or another available language [M2]. If you
are copying from an external source or from a tape position, select the sound track on
the other unit.

Select the appropriate setting if you have connected an external unit to the 
DIGITAL AUDIO OUT of the DVD Recorder.

Select the audio output mode for a scan frequency of 96 kHz or 88.2 kHz. Despite this
setting, signals are converted to 48 kHz or 44.1 kHz if they have a scan frequency over
96 kHz or 88.2 kHz or if the disc is copy-protected.
On: The connected unit cannot process signals with a scan frequency of 96 kHz or
88.2 kHz. Signals are converted with 48 kHz or 44.1 kHz.
Off: The connected unit can process signals with a scan frequency of 96 kHz or 88.2 
kHz. Signals are output as 96 kHz or 88.2 kHz.

Bitstream: The connected unit can decode the corresponding signal.
PCM: If the connected unit cannot decode the corresponding signal, the setting must be
changed to [PCM]. Otherwise, the loud noise can lead to damage to your hearing or 
loudspeaker. Make the necessary changes depending on your audio system.

Select the audio type when copying from the DV input.
Stereo 1: Original sound; Stereo 2: Voice-over, Mix: Original sound + voice-over

[On] [Off] (Dolby Digital Only)

Choosing the audio type when recording in XP mode. The picture quality of LPCM 
recordings may possibly be poorer than normal recordings in XP mode

Changes the brightness of the display on the unit.

On: T

he grey background is displayed when there is no analogue TV reception

.

Subtitle language for digital programmes (standard or for the hard-of-hearing).

Off: The Service Messages are not shown.

Select the time for screen displays.

Off: T

he screens are not shown on changing the station

.