Инструкция С Настройками для Panasonic dmr-e60eb

Recording television programmes (continued)

<, OPEN/CLOSE] (42) to open the tray and 

≥Recording of the TV programme that you are viewing on the 

TV starts.

≥In some cases, it may not be possible to change the 

programme position on the TV during Direct TV Recording.

∫] (7) to stop recording.

ªLinked timer recordings with external equipment 

[RAM] [DVD-R]

If an external equipment (for example a satellite receiver) with a 
timer function is connected to the AV2 socket of this unit by a 
21-pin cable, it is possible to control the recording of the unit from 
this equipment. For the connection to the external equipment, see 
page 58.

Preparation
≥Make sure that “AV2 Connection” is set to “Ext Link 1” or 

“Ext Link 2”. (page 63)

≥Timer programming has to be done on the external equipment 

and switch to the timer recording standby mode. Refer to the 
equipment’s operating instructions.

1) Press [EXT LINK] 

(43) on the unit to switch the unit over to the 

timer recording standby mode.
≥As long as a video picture is being transmitted by the Satellite 

or Digital Receiver, the unit will record it.

The notice is displayed on the TV screen.
(Only when [Ext Link 2] is selected)
To delete it, press [ENTER] 

2) To cancel the external control, turn off the timer recording 

standby mode of the unit by pressing [EXT LINK] 

For your reference
≥To switch TV automatically to the picture from the unit in 

playback mode, connect the AV1 socket of this unit to the TV by 
a 21-pin cable.

≥This function does not work with some equipment. Refer to the 

equipment’s operating instructions.

≥The beginnings of recordings may not be recorded correctly in 

some cases.

≥When “AV2 Connection” is set to “Ext Link 2”, this function does 

not work if the input signal is NTSC system.

≥The play picture or menu picture is not output from AV2 socket 

during Linked timer recording standby mode.

≥Some televisions have separate terminals for RGB input and Q 

Link and this means you cannot view RGB signals and use Direct 
TV Recording at the same time. Refer to your television's 
operating instructions and select the type best suited to your 
needs.

[RAM]

You can start play from the beginning of a programme while 
continuing to record it.

Preparation
Switch [DVD, TV] 

(19) to “DVD”.

1] (26).

Play starts from the beginning of the programme being recorded.

(1) For example: while recording programme 2 (sport)
(2) You want to watch the sports programme currently recording 

(programme 2)

(3) Do the above operation (press [

1] (26)) and…

(4) The same sports programme is recorded while you are 

watching it.

ªTo stop play and recording

1) Press [

∫] (7). Play stops.

(Wait 2 or more seconds)

2) Press [

∫] (7). Recording stops.

≥You cannot stop recording with [∫] (7) during timer 

recording. To stop timer recording, press [

, TIMER] 

For your reference
≥The playback images are displayed during chasing play.
≥Sound is not output while fast-forwarding.
≥Play cannot be started until at least 2 seconds after recording 

starts.

≥If you fast-forward and get to within a few seconds of the part 

being recorded, the picture will change to show the images 
currently being played.

≥The operation is shown on the unit’s display (page 5).
≥If you fast-forward and get to within a few seconds of the part 

being recorded, the unit automatically switches to play and 
shows the images about 5 seconds before. You cannot get any 
closer than this.

≥While this function is activated, TIME SLIP indicator (48) lights 

up.

(1)

(2)

(3)

(4)

B.book  28 ページ  ２００３年５月２日　金曜日　午前１０時８分