Инструкция С Настройками для Panasonic dmr-e60eb

Timer recording (continued)

(10) when you have finished making 

≥To continue programming:

Repeat steps 2, 3 and 4.

Press [

, TIMER] 

(14).

Ensure “

” lights on the unit’s display.

1) While the Timer Programme List Screen is being shown, use 

[

3, 4] (10) to select the programme you want to change, and 

press [ENTER] 

(10) to show the Timer Programme Correction 

screen.
≥You may also select programme by inputting a 2-digit number 

using the numeric buttons 

≥Use [2, 1] (10) to move to the page preceding or following 

the one on display.

2) Move through the items with [

1] (10) and change the settings 

with [

3, 4] (10) and press [ENTER] (10).

Note
≥The built-in clock employs 24-hour system.
≥The remaining time is not shown if you insert discs other than 

DVD-RAM or DVD-R.

≥The remaining time displayed is calculated based on the current 

recording mode.

≥If the disc is protected (pages 37, 74), the unit switches to 

standby but does not go on standby for recording. Check the disc 
carefully.

≥Recording is not possible unless you set “Disc Protection” in 

“DISC INFORMATION” to “Off”. (page 37)

≥You cannot record to a disc if the write protect tab on a cartridge 

disc is set to protect. Release this before operation (page 74).

≥Even if the unit is put in the timer recording standby mode or the 

timer recording is being performed, you can play a programme.

≥If the unit is not put in the timer recording standby mode at the 

latest 10 minutes before the programmed timer recording starting 

time, the [

] flashes on the unit display. In this case, press the 

[

,  TIMER] 

(14) button to put the unit in the timer recording 

standby mode.

≥When recording more than one programme in a row, for 

DVD-RAM the first few seconds, and for DVD-R about the first 
30 seconds of all programmes from the second one onwards will 
not be recorded.

[RAM] [DVD-R]

The Timer Programme List screen appears.

A)

¥

This programme is currently recording.

W

The programme is overlap with another programme.

F

The disc was full or the maximum number of programmes or 
scenes was reached so the programme failed to record.

The television programme was copy-guarded so the 

programme failed to record.

X

The programme did not complete recording because the 
disc is dirty or some other reason.

B)

OK:

Displayed if the recording can fit in the remaining 
space on the disc. However, when the programme 
becomes longer than scheduled during the 
recording by setting “PDC” to “ON”, the 
programme may not be recorded until its end.

# (Date):

For recordings made daily or weekly, the display 
will show until when recordings can be made 
based on the time remaining on the disc.

!:

Displayed if the disc is not inserted in the unit or is 
write-protected (pages 37, 74) or there is not 
enough memory capacity left on the disc.

ªTo change the programme

See at left.

ªTo exit from the Timer Programme List screen

Press [PROG/CHECK] 

(13) or [RETURN] (28). (The television is 

shown.)

For your reference
≥Programmes that failed to record are deleted from the list at 4 

a.m. the day after tomorrow.

[RAM] [DVD-R]

ªTo put the unit on recording standby
Press [

(14).

The unit turns off and “

” lights on the unit’s display.

Note
≥The unit cannot go to timer recording standby if the disc is 

protected (pages 37, 74) or full (“

” flashes). Check the disc 

carefully.

ªTo release the unit from recording standby

If you want to record something else before the programme start 
time, for example:

(14).

The unit turns on and “

” goes out.

≥Be sure to press [

, TIMER] 

(14) before the programme start 

time to put the unit on recording standby. The programme only 

works if “

” is on.

ªTo stop recording while a programme is working
Press [

(14).

[RAM] [DVD-R]

(5) or [ERASE] (32) while the 

3, 4] (10) to select the programme 

(5) or [ERASE] (32).)

≥You can not delete programmes that are currently recording.

W
F

X

A

B

B.book  34 ページ  ２００３年５月２日　金曜日　午前１０時８分