Инструкция С Настройками для Panasonic dmr-e60eb

[SD/CARD]

≥When the card indicator (“SD” or “CARD”) on the unit display is 

flashing, the card is being read from or written to. Do not turn off 
the power or remove the card. Such action may result in 
malfunction or loss of the card’s contents.

ªSD card slot
Inserting the card

(1) Press down.
(2) Turn the label up with the notch facing in.
(3) Insert the card straight-in until it fits into place.
(4) Lift the tab until it clicks into place flush with card.

(1) Press down.
(2) Press on the center of the card.

≥Raise the guard after removing the card.

ªPC card slot
Inserting the card

(a) Hold the edge of the card and insert until it fits into place.

≥Do not press directly on the memory card.

(b)

2 Align to match the mark.

(c) Terminal connections facing into the unit.
(d) The labelled side facing upwards.

(1) Push
(2) PC card eject button comes out.
(3) Push again

≥If using the adaptor, remove the adaptor and card together.
≥If PC card eject button (40) on the unit does not come out,

To remove the PC card, press the card in once more and 
then repeat steps (1)–(3).

[SD/CARD] [RAM]

1) While stopped

Press [FUNCTIONS] 

(11).

2) Use [

3, 4, 2, 1] (10) to select “JPEG” and press [ENTER] 

3) Use [

3, 4] (10) to select “Input” and press [ENTER] (10).

4) Use [

2, 3, 4] (10) to select the drive (SD CARD/PC CARD/

DVD) and press [

1] (10).

≥A list of the valid 

folders in the drive 
appears.

(a)drive
(b)Folder name
(c)Folder number
(d)Numbers of scenes 

(still pictures) and 
files that are in the 
selected folder

5) Use [

3, 4] (10) to select the still picture folder.

≥You can also select the still picture folder by entering a 3-digit 

number with the numeric buttons 

(4).

≥It is possible to give the folder a title.

6) Press [ENTER] 

(10).

For your reference
≥“Scene” and “File” refer to numbers inside the folder selected. 

Lower files are not included.

≥If there is more than one upper folder, pressing [:] or [9] 

(6) will switch between them. (See “Folders that can be displayed/saved”, page 12)

It is possible to enter up to 36 characters.
After selecting the still picture folder for display (step 5 of 
“Selecting the drive and the folder”),
1) Use [

1] (10) to select “Folder title” and press [ENTER] (10).

2) Enter the title. (page 36)

Note
≥Titles inputted using this unit will not be displayed on other 

equipment.

≥Folder titles entered using this unit will only be displayed using 

this unit. Folders entered using this unit are written to the 
TITLE.DVD file.

≥If there is not enough space for the entry or if the limit for the 

number of files has been exceeded (page 12), the title cannot be 
entered.

[SD/CARD] [RAM]
≥When the card is protected (page 12) or the disc is protected 

(page 37, 74), it is not possible to erase the still pictures.

Discs:
It is not possible to open the disc tray while the still pictures 
screen is displayed.

(1)

(3)

(2)

(4)

Card

(1) (2)

(a)

(b)

(c)

(d)

(1)

(2)

(3)

(c)

3

3

1

1

1

1

1

1

1

1

(d)

(b)

(a)

B.book  49 ページ  ２００３年５月２日　金曜日　午前１０時８分