Инструкция С Настройками для Panasonic dmr-e60eb
57
Connecting external equipments (continued)
Connecting a digital amplifier or system
component [A]
component [A]
(1) Rear panel of this unit
(2) Insert fully, with this side
(2) Insert fully, with this side
facing up. (Do not bend
when connecting.)
when connecting.)
(3) Optical digital audio
cable (not supplied)
(4) To optical digital input
(5) Amplifier
(5) Amplifier
or
system component (with
or without decoders) (not
supplied)
system component (with
or without decoders) (not
supplied)
(6) Speakers (not supplied)
≥Example: 6 speakers
For your reference
≥Change the settings in the “Sound” menus (page 62) to suit the
≥Change the settings in the “Sound” menus (page 62) to suit the
digital equipment you have connected. If the equipment can
decode Dolby Digital, set “Dolby Digital” to “Bitstream” (factory
setting). If the equipment can decode DTS, set “DTS” to
“Bitstream”.
decode Dolby Digital, set “Dolby Digital” to “Bitstream” (factory
setting). If the equipment can decode DTS, set “DTS” to
“Bitstream”.
≥The DTS decoder must be compatible with the signals recorded
on DVD.
≥During Quick View (Play k1.3), the Digital Audio Output will
change to PCM Output.
You can record the digital signal directly onto digital recording
equipment.
The signals on DVDs will be converted to 48 kHz/16 bit linear
PCM.
When recording DVDs, ensure the following conditions are met.
≥There is no copy guard recorded on the disc.
≥The recording equipment can handle a sampling frequency of
equipment.
The signals on DVDs will be converted to 48 kHz/16 bit linear
PCM.
When recording DVDs, ensure the following conditions are met.
≥There is no copy guard recorded on the disc.
≥The recording equipment can handle a sampling frequency of
48 kHz/16 bit.
≥You cannot record MP3.
If you want to use the synchro recording feature on your digital
recording equipment and you use connection [A] or [B] to record
from CDs or video CDs, first pause at the point you want to record
from, activate the synchro feature, then restart play on the unit.
recording equipment and you use connection [A] or [B] to record
from CDs or video CDs, first pause at the point you want to record
from, activate the synchro feature, then restart play on the unit.
Connecting an analog amplifier or
system component [B]
system component [B]
(1) Audio cable
a) Red (R)
b) White (L)
b) White (L)
(2) Rear panel of this
unit
(3) To AUDIO OUT
(L/R)
(4) Audio cable (not
supplied)
(5) Audio input (L/R)
(6) 2-channel analog
(6) 2-channel analog
amplifier or
system
component
(not supplied)
system
component
(not supplied)
ªTo enjoy Dolby Pro Logic
(page 71)
You will also need to connect center and surround speakers in
addition to the front speakers to enjoy surround sound. Read the
instructions for the equipment for connection details. Turn V.S.S.
off. Dolby Pro Logic will not function correctly if V.S.S. is on.
addition to the front speakers to enjoy surround sound. Read the
instructions for the equipment for connection details. Turn V.S.S.
off. Dolby Pro Logic will not function correctly if V.S.S. is on.
OPTICAL
DIGITAL AUDIO OUT
(PCM/BIT STREAM)
R - AUDIO - L
R - AUDIO - L
(1)
(3)
(4)
(5)
(6)
(2)
OPTICAL
DIGITAL AUDIO OUT
(PCM/BIT STREAM)
R - AUDIO - L
VIDEO
S-VIDEO
R - AUDIO - L
VIDEO
S-VIDEO
AV
4
4
I
N
OUT
(3)
(4)
(2)
(5)
(6)
(1)
a)
b)
B.book 57 ページ ２００３年５月２日 金曜日 午前１０時８分