Инструкция С Настройками для Panasonic dmre60

If you are connecting your unit to a television with [Q Link]

°

1

, follow 

these steps.
Begin here also if you have a television with [DATA LOGIC]

°

2

, 

[Easy Link]

°

3

, [Megalogic]

°

4

 or [SMARTLINK]

°

5

 and a 21-pin Scart 

socket.
For details, also read your television’s operating instructions.

ªConnect as following steps

1

RF Coaxial cable (supplied)

2

Fully-wired 21-pin Scart cable (not supplied)

3

Aerial lead (not supplied)

4

AC mains lead (supplied)

5

AC mains lead (not supplied)

Sockets
(1) AV1 21-pin Scart socket
(2) Aerial Input socket
(3) Aerial Output socket
(4) Aerial Input socket
(5) 21-pin Scart socket

Hints:
≥Q Link offers a range of convenient functions. For example, 

downloading of the tuning positions of all available television 
stations into your unit’s memory if you connect the unit to your 
television with a fully wired 21-pin Scart cable (not supplied). 
Features similar to Q Link have different names and may not 
work the same.

°

1

[Q Link] is a registered trademark of Panasonic.

°

2

[DATA LOGIC] is a registered trademark of Metz.

°

3

[Easy Link] is a registered trademark of Philips.

°

4

[Megalogic] is a registered trademark of Grundig.

°

5

[SMARTLINK] is a registered trademark of Sony.

For details, refer to your television’s operating instructions or 
consult your dealer.
≥Unlike in most commercially available 21-pin Scart cables, all 21 

pins of one plug on a fully wired 21-pin Scart cable are connected 
to the matching pins on the other end of the cable.

First, switch this unit to standby.

≥The television starts tuning all available stations and adjusting 

the clock.

≥When the television finishes its own auto setup, this unit switches 

on and starts downloading the setup data from the television (if it 
has [Q Link] or [DATA LOGIC]).

≥If your television has [Easy Link], [Megalogic] or [SMARTLINK], 

the Country setting menu appears on the television. Use 
[

3, 4, 2, 1] (10) to select the country and press [ENTER] 

≥Downloading starts.
≥Downloading is complete when you see the television picture.

Note:
≥If you switch on this unit before switching on the television, 

downloading may not be performed correctly. Follow these steps 
if this occurs.

1) Wait until Auto Setup is complete on both the television and 

this unit.

2) Press [FUNCTIONS] 

(11) to show the FUNCTIONS window 

and use [

3, 4, 2, 1] (10) to select “SETUP” and then press 

[ENTER] 

(10) to display the SETUP menu on the television.

3) Use [

3, 4, 2, 1] (10) to select “Tuning” and then 

“Download”.

4) Press [ENTER] 

(10) and select “Yes”. Downloading starts.

5) Downloading is complete when you see the television picture.

Hints:
≥If you have a Panasonic television, starting downloading will 

automatically display “Download”. If you have a different 
television, however, “Download” may not appear. Select the AV 
input on your television to see “Download”.

≥If you select “Schweiz”, “Suisse”, or “Svizzera” in the Country 

setting menu, another menu appears to let you set “Power Save” 
to “On”. In this setting, the unit’s power consumption is minimised 
when it is switched to standby. To turn the unit on, press and hold 
[

Í/I] on the main unit. It will not work on the remote control.

RF IN

RF OUT

OPTICAL

AV1 (TV)

AV2 (DECODER/EXT)

DIGITAL AUDIO OUT
(PCM/BIT STREAM)

R - AUDIO - L

VIDEO

S-VIDEO

R - AUDIO - L

VIDEO

S-VIDEO

A

V4 IN

OUT

(1)

(2)

(3)

1

2

3

4

(4)

(5)

5

DVD(PAL).book  12 ページ  ２００３年５月１日　木曜日　午後１０時４３分