Инструкция С Настройками для Panasonic dmre60

Changing the unit’s settings (continued)

≥Underlined items are the factory presets.

ª Picture

REC

Select the picture sharpness when recording.

[Fine]

[Normal]

Pictures become clear and vivid. Normally, use this setting.

Select it when recording noisy pictures.

≥“Fine” is automatically selected if you set “TV System” to “NTSC”.

REC

Switch between automatic and fixed hybrid VBR resolution when 
recording.

[Automatic]

[Fixed]

The unit automatically switches resolution rates during 
recording according to the image. The unit reduces block 
noise, which occurs during MPEG compression, by selecting 
the optimum rate. 

The resolution rate is fixed to ensure the resolution rate is not 
reduced.

PLAY

Select the type of picture shown when you pause play.

[Automatic]

[Field]

[Frame]

Less blurred field stills are shown. Select if jittering occurs 
when “Automatic” is selected.

Sharper frame stills are shown. Select if small text or fine 
patterns cannot be seen clearly when “Automatic” is 
selected.

PLAY

Turn seamless play on or off on discs with play lists.
≥Seamless Play does not work with programmes recorded in 

LPCM or when using Quick View (Play

k1.3).

[On]

[Off]

The scenes in play lists created with this unit are played 
seamlessly. This may cause shifting of the points where 
scenes change. Some play lists cannot be played seamlessly.
≥Seamless Play does not effect programmes that have been 

recorded with LPCM sound.

The points where scenes in play lists are played accurately, 
but this may cause the picture to freeze for a moment when 
scenes change.

ª Sound

t1.3 & Audio during Search (

PLAY

) (page 16)

[RAM] [DVD-R] [DVD-A] [DVD-V] [VCD]

Choose whether to operate the Quick View (Play

k1.3) or not and 

whether to have sound during search. 

[On]

[Off]

[DVD-A]
≥You may hear sound regardless of this setting with some discs.

PLAY

[DVD-V] 

(Dolby Digital only)

Change the dynamic range for late night viewing.

[On]

[Off]

REC

) (page 18)

Select whether to record the main or secondary audio type when 
recording to DVD-R or when recording using LPCM sound.

[M1]

[M2]

PLAY

(Press [ENTER] 

(10) to show the following settings. To return to 

the previous screen, press [RETURN] 

(28).)

PCM Down Conversion (page 59)

[On]

[Off]

≥Select “On” when using a copyright protected disc, since the 

audio output does not work.

Dolby Digital (page 59)

Choose whether to output Dolby Digital bitstream signals for 
decoding on other equipment or to convert them to PCM 
signals for 2-channel output.

[Bitstream]

[PCM]

DTS (page 59)

Choose whether to output DTS bitstream signals for 
decoding on other equipment or to not output signals at all.

[Bitstream]

[Off]

MPEG (page 59)

Choose whether to output MPEG bitstream signals for 
decoding on other equipment or to convert them to PCM 
signals for 2-channel output.

[Bitstream]

[PCM]

REC

Choose the audio type when recording with XP mode.

[Dolby Digital]

[LPCM]

≥Even if “LPCM” is set, sound becomes “Dolby Digital” in 

recording mode other than XP mode.

REC

(page 30)You can select the kind of sound when recording from the unit’s DV 
terminal.

[Stereo 1]

[Stereo 2]

[Mix]

ª Display

Choose whether to show on-screen messages automatically or 
not.

[Automatic]

[Off]

Select whether to show the grey background, normally shown 
when television reception is poor.

[On]

[Off]

[On]

[Off]

The Channel Guide will appear for a few seconds each time 
the channel is changed with [

X, W, CH] (23).

The Channel Guide will not appear.

Changes the brightness of the unit’s display.

[Bright]

[Dim]

[Automatic]

In standby mode: Off
During normal play: Dim
Others: Bright

≥This setting is fixed with “Automatic” if you set “Power Save” to 

“ON”.

DVD(PAL).book  57 ページ  ２００３年５月１日　木曜日　午後１０時４３分