Руководство По Работе для Panasonic ESRT87

20

►Self-cleaning recharger

The blade has not been 
thoroughly washed.

If the shaver is not cleaned for 
more than 2 weeks, first clean 
with the cleaning brush to remove 
beard trimmings. (See page 18.)
Do not add detergent and water 
except when replacing the 
cleaning liquid.
Doing so may deteriorate the 
cleaning function. (See page 16.)
After cleaning, oil‑like droplets 
may remain on the outside of 
the foil frame. This is the 
lubricating component of the 
cleaning liquid and does not 
indicate a problem. You may 
wipe it off with a soft cloth.

The STATUS lamp glows.

See page 22.

The mode does not start.

Check that the AC adaptor is 
connected to the self‑cleaning 
recharger, and that the AC 
adaptor is plugged in to a 
household outlet. (See page 12.)
Confirm that the shaver is 
properly attached to the self‑
cleaning recharger. 
(See page 12.)
The Clean or Dry function may 
stop out of recommended 
ambient temperature range.
(5 – 35 °C)
Check if the STATUS lamp 
glows. (See page 22.)

Cleaning liquid has 
accumulated in the 
cleaning tray.

Remove any waste, etc. that 
has accumulated in the drain at 
the bottom of the cleaning tray. 
(See page 19.)
If you use the self‑cleaning 
recharger when the shaver is 
wet or when soap or shaving 
gel is on the shaver, cleaning 
liquid may accumulate in the 
cleaning tray.