Инструкция для Panasonic tu-cth100
TU-CTH100
8
Start Up
Connect your PVR as shown on the previous page and switch on using either the
Standby On/Off key on the remote control or the Power Button on the front of the PVR.
Standby On/Off key on the remote control or the Power Button on the front of the PVR.
The Panasonic start up screen will be displayed and then the Auto setup feature will
begin, your stations will be located, sorted into order and stored ready for use.
During Auto Setup the front display will show AUTO SETUP. When Auto Set Up has
finished, the front display will show the name of first channel stored. If you have
connected the PVR to TV with an RF cable, you will have to tune the TV in order to view
the signal from the PVR.
Note: If broadcasts are being received from more than one transmitter, regional
variations of channels will be placed at position 800 and above.
The Picture and Sound Menu will be displayed. Use the Up/Down cursor keys to
select each of the following menu options:
RF Output
The PVR will automatically allocate an available channel position for RF output. Should
there be any interference you can change the RF output channel using the number keys
or you can switch off the RF output by inputting 00. Press the OK key to store. Do not
switch off the RF output if the PVR is not connected to a TV by SCART cable.
AV1 Output
Allows the user to select the type of output signal from the AV1 (TV) SCART. Select from
RGB, Video and S-Video using the left/right cursor keys. Press the OK key to store.
Please consult your TV user manual for the preferred signal format.
AV2 Output
Allows the user to select the type of output signal through the AV2 (EXT) SCART. Select
from Video and S-Video using the left/right cursor keys. Press the OK key to store.
Please consult your recorder user manual for the preferred signal format.
Picture Aspect
Allows the user to select the ratio in which their picture is displayed. Select your
preferred Picture Aspect, either 4:3 or 16:9. Press the OK key to store.
To exit this screen, select the Continue to Owner ID option and press the OK key.
begin, your stations will be located, sorted into order and stored ready for use.
During Auto Setup the front display will show AUTO SETUP. When Auto Set Up has
finished, the front display will show the name of first channel stored. If you have
connected the PVR to TV with an RF cable, you will have to tune the TV in order to view
the signal from the PVR.
Note: If broadcasts are being received from more than one transmitter, regional
variations of channels will be placed at position 800 and above.
The Picture and Sound Menu will be displayed. Use the Up/Down cursor keys to
select each of the following menu options:
RF Output
The PVR will automatically allocate an available channel position for RF output. Should
there be any interference you can change the RF output channel using the number keys
or you can switch off the RF output by inputting 00. Press the OK key to store. Do not
switch off the RF output if the PVR is not connected to a TV by SCART cable.
AV1 Output
Allows the user to select the type of output signal from the AV1 (TV) SCART. Select from
RGB, Video and S-Video using the left/right cursor keys. Press the OK key to store.
Please consult your TV user manual for the preferred signal format.
AV2 Output
Allows the user to select the type of output signal through the AV2 (EXT) SCART. Select
from Video and S-Video using the left/right cursor keys. Press the OK key to store.
Please consult your recorder user manual for the preferred signal format.
Picture Aspect
Allows the user to select the ratio in which their picture is displayed. Select your
preferred Picture Aspect, either 4:3 or 16:9. Press the OK key to store.
To exit this screen, select the Continue to Owner ID option and press the OK key.
Owner ID Screen
This screen allows the user to enter their personal details. This may assist the police if
this box is stolen.
This information can be protected by means of a PIN number.
Use the up/down cursor keys to step through each digit position and the left/right
cursor keys to select the correct number or letter (The characters available are
displayed at the bottom of the screen).
PIN number
This is your own personal number which will need to be entered each time the Owner ID
menu is accessed. You do not have to enter a PIN number.
Name
The user can enter their name.
House No.
The user can enter their house number.
Postcode
The user can enter their postcode.
Once all the information has been entered, press the OK key to store and exit the Owner ID screen. Confirm that you
wish to store the settings by pressing the OK key.
To exit the Owner ID screen without inputting any information just press the EXIT key.
this box is stolen.
This information can be protected by means of a PIN number.
Use the up/down cursor keys to step through each digit position and the left/right
cursor keys to select the correct number or letter (The characters available are
displayed at the bottom of the screen).
PIN number
This is your own personal number which will need to be entered each time the Owner ID
menu is accessed. You do not have to enter a PIN number.
Name
The user can enter their name.
House No.
The user can enter their house number.
Postcode
The user can enter their postcode.
Once all the information has been entered, press the OK key to store and exit the Owner ID screen. Confirm that you
wish to store the settings by pressing the OK key.
To exit the Owner ID screen without inputting any information just press the EXIT key.
You can now begin viewing Programmes.