Руководство По Работе для Panasonic ERGK60

13

• Clean the trimmer and the blade after each use. 

(If not cleaned, the motion will become poor and the sharpness 

will worsen.)

• Make sure that the trimmer is turned off.

• Remove the trimmer from the AC adaptor.

►

To remove light dirt

To remove heavy dirt

1. Remove the attachment and 

turn the trimmer on.

2. Run water down the water 

inlet at the back of the main 

body, rinse thoroughly for 

approximately 20 seconds, 

and then turn the trimmer 

off.

• Rinse with water and shake 

up and down several times 

to remove the water.

1. Remove the attachment and 

blade.

2. Clean the trimmer, the blade 

and the attachments with 

running water.

 

 

• Rinse with water and shake 

up and down several times 

to remove the water.

•  Be careful not to hit the main body on the sink or any other 

object while draining the water. Failure to do so may cause 

malfunction.

3. Wipe off the water with a towel and 

let it dry naturally.

• It will dry faster with the blade 

removed.

4. Apply the oil to the blade after drying. 

(See page 14.)

5. Attach the attachment and the blade 

to the main body.

►

Main body and blade
• Remove the blade. (See page 14.)

1. Brush off any hair trimmings from the 

main body and from around the blade.

2. Brush off the hairs from the blade edge.

3. Brush any hair trimmings out from between 

the stationary blade and the moving 

blade while pressing down the cleaning 

lever (

b

) to raise the moving blade.

b

4. Apply the oil to the blade. (See page 14.)

5. Attach the attachment and the blade to the main body.

PB014575 - ER-GK60 �������01EN_03-29-17.indd   13

2017/3/29   10:09:10