Руководство По Работе для Panasonic cq-c9800u

26

27

Note: 
≥  New stations overwrite existing saved stations after this procedure.

This is a useful function that can call broadcast 
stations directly during playback in other modes (CD, 
CD Changer, etc.), even when the power is off.

Your favorite radio station can be memorized in 
[D·M] (direct memory).
Default: FM 87.9 MHz

∫ Memorize

1

 Select a band and frequency.

2

  Press and hold [D·M] for more than 

2 seconds.

 

≥  Frequency blinks once and is saved in the 

memory.

Note: 
≥  New stations overwrite existing saved stations 

after this procedure above.

∫ Recalling the Direct Memory

Press [D·M].

Press [D·M] again to cancel.

%] [$] 

[D·M] (Direct Memory)

[BAND] 
(APM: Auto Preset Memory)

VOL

6

5

#

%] [$]

(Tuning)

[BAND]
(Auto Preset 
Memory)

[1] to [6]
(Preset station)

Stereo indicator

Press [SOURCE] to select the radio mode.

1

$]: Higher frequency

%]: Lower frequency

Press and hold [

%] or [$] for more than 

0.5 seconds, then release. Seeking will start.

3

Frequency

Band

Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM band selections.

Caution:
≥  To ensure safety, never attempt to preset 

stations while you are driving.

Automatically save stations with good reception in 
the preset memory.

1

 Select a band (previous page).

2

 Press and hold [BAND] (APM: Auto Preset 

Memory) for more than 2 seconds.

 

≥  The 6 stations with good reception will be 

automatically saved in the memory under 
preset number 1 to 6.

 

≥  Once set, the preset stations are sequentially 

scanned for 5 seconds each (scanning).

Manually save a station in the preset memory.

1

 Select a band and frequency (previous page).

2

 Press and hold [

"] or [#] until the preset 

number blinks.

3

 Press  [

"] or [#] to select the preset number 

(1 to 6).

4

 Press and hold [

"] or [#] for more than 

2 seconds to memorize.

 

≥  The display blinks once, and a receiving station 

is saved in the memory.

1

 Select a band (previous page).

2

  Press  [

"] or [#].

 
 Press 

[1] to [6].

Note: 
≥  When pressing [MENU] (pressing and hold 

[MENU]  for more than 2 seconds on the remote 
control unit) in radio mode, the following display 
appears.

  This is because radio mode does not have 

any menu settings.

1

 Select a band and frequency 

(previous page).

2

 Press and hold [1] to [6] for more than 

2 seconds to memorize.

"] [#] 

(Preset station)

Press [BAND].

2

FM1

FM2

FM3

AM

Direct Memory mode

"] [#] 

(Preset station)