Руководство По Работе для Panasonic PV-GS300

Edit mode

LSQT0974

Printing pictures by directly
connecting to the printer (PictBridge)

To print pictures by directly connecting the
Camcorder to the printer, use a printer compatible
with PictBridge. (Read the operating instructions
for the printer.)
≥Insert a card and set to Card Playback Mode.

Connect the Camcorder and the printer with
the supplied USB cable.

1 USB cable

≥The [PictBridge] indication appears on the

screen of the Camcorder.
(When the printer is being recognized, the
[PictBridge] indication blinks.)

≥When no card is inserted in the Camcorder, the

[PictBridge] indication does not appear. (You
cannot print any pictures.)

≥When the Camcorder and the printer are not

connected properly, the [PictBridge] indication
keeps blinking. (It will blink for over approx.
1 minute.) Connect the cable or check the
printer.

≥We recommend using the AC adaptor as the

power supply.

≥When images are displayed in multi-screen,

they cannot be printed.

Select [SINGLE PRINT] or [DPOF PRINT].
≥If there is no file with a DPOF setting, you

cannot select [DPOF PRINT].

≥When you select [DPOF PRINT] for printing,

set the number of prints in DPOF setting.

≥When [DPOF PRINT] is selected, print after

you determine the paper size. (Step 6)

≥When [DPOF PRINT] is selected, date

printing is unavailable.

Move the joystick left and right to select a
desired picture, and then press it.

Select the desired number of prints.
≥You can set up to 9 prints.

Select the setting for date printing.
≥If the printer is not capable of date printing,

this setting is unavailable.

Select [PAPER SIZE].

[STANDARD]: Size specific to the printer
[4

a5 INCH]

a7 INCH]

a6 INCH]

[A4]

≥You cannot set paper sizes not supported on

the printer.

Select [PAGE LAYOUT].

[STANDARD]: Layout set on the printer

[

]

No frame

[

]

With frame

≥You cannot set a layout not supported on the

printer.

Set [PRINT] >> [YES] to start printing.

When you stop printing halfway

Move the joystick down.

≥Avoid the following operations during printing.

These operations disable proper printing.

≥Disconnecting the USB cable
≥Removing the card
≥Switching the mode dial
≥Turning off the power

≥Check the settings for the paper size, quality of

print, etc. on the printer.

≥Still pictures recorded on other equipment may

not be printed.

≥When the Camcorder and the printer are

connected in the Tape Recording/Playback
Mode, the [

] Indication may appear on the

LCD monitor. However, pictures cannot be
printed.

PictBridge

LSQT0974_ENG.book 51 ページ２００５年１１月７日　月曜日　午前１１時５８分