Руководство По Работе для Panasonic PV-GS300

With a PC

LSQT0974

≥Although the screens in these Operating 

Instructions are shown in English for the sake of 
example, other languages are supported as 
well.

≥These instructions do not cover the basic 

operations of the personal computer or define 
any terms. For this information, refer to the 
Operating Instructions which accompany your 
personal computer.

≥Do not disconnect USB connection cable while 

the status indicator of Camcorder is on. It may 
freeze the software or destroy the data in 
transfer.

≥We recommend using the AC adaptor as the 

power source for the Camcorder when 
connecting to the personal computer. Data may 
be lost if the battery power is lost while 
transferring data.

≥If the Camcorder is used as a Web Camera 

while virus checking software is running, the 
Camcorder’s operation may stop midway 
through. In this case, exit the Messenger, 
reconnect the Camcorder and restart the 
Messenger.

≥Do not delete the folders in Memory Card such 

as picture folder. Memory card may not be 
recognized if folders are deleted.

≥When the Camcorder is switched to the PC 

Connection Mode while it is connected to the 
personal computer, the operation mode of the 
Camcorder cannot be switched. In this case, 
disconnect the USB connection cable. Switch 
the operation mode of the Camcorder and 
reconnect the cable.

≥If you install the USB driver while the USB 

Connecting cable is being connected, or if you 
do not follow these Operating Instructions, the 
Camcorder will not be recognized correctly. In 
this case, delete the driver from 
[Device Manager] as described below, uninstall 
the driver, and re-install it.
Set the Camcorder to Tape Recording Mode, 
Tape Playback Mode or PC Connection Mode, 
connect it to the personal computer, and delete 
[DVC] or [Web-Camera] from [Device Manager].

Depending on your personal computer, one of 
the following screens may appear.
1 Your personal computer does not support 

USB 2.0 (High Speed) so the video on tape 
cannot be imported from the Camcorder to the 
personal computer with the USB cable. 
Connect to an USB interface port etc.

≥You can use the WEB camera function.

2 The personal computer has recognized a 

USB 2.0 (High Speed) driver other than the 
Microsoft driver. Update the driver to make 
sure that it operates properly. 

3 The USB 2.0 (High Speed) driver may not be 

recognized correctly. Update the driver to 
make sure that it operates properly. 

ª

SD Memory Card
The SD Memory is an external Memory Card that 
is available in larger capacities. It has a write 
protect switch to prevent data writing and card 
formatting, as well as a copyright protection 
function. 
≥SD Logo is a trademark.
≥All other company and product names in the 

operating instructions are trademarks or 
registered trademarks of their respective 
corporations.

Files recorded on a SD Memory Card 
It may not be possible to play back the files on 
this Camcorder recorded on and created by other 
equipment or vice versa. For this reason, check 
the compatibility of the equipment in advance.

ª

Data files recorded on an “SD Memory Card” by 
this Camcorder conform with DCF (Design rule 
for Camera File system) established by JEITA 
(Japan Electronics and Information Technology 
Industries Association).
≥If you attempt to play back files recorded with 

this Camcorder on other equipment or to play 
back files recorded with other equipment on this 
Camcorder, you may not be able to play them 
back. Please check the compatibility with the 
other equipment in advance.

Cancel

LSQT0974_ENG.book  61 ページ  ２００５年１１月７日　月曜日　午前１１時５８分