Руководство По Работе для Panasonic KXFC238FX
8. Answering Machine
63
Remote Operation
8.4 Operating from a remote location
You can call your unit from a remote location and access the answering machine.
Important:
L
Program the remote operation ID beforehand (feature #11 on page 66).
L
Set the unit to TAM/FAX mode before going out (page 55).
L
Use a touch tone telephone for remote operations.
Helpful hints:
L
When you press a key, press firmly.
L
Please make a copy of the following table, and carry it with you when you go out.
8.4.1 Summary of remote
operation
operation
1
Call your unit.
2
During the TAM/FAX greeting message,
enter the remote operation ID.
enter the remote operation ID.
3
When there are new recorded messages
1. A long beep will sound.
2. Short beep(s) will sound up to 8 times.
L
This indicates the number of new
messages.
messages.
3. New messages will be played back.
When there are no new messages
1. A long beep will sound (short beep will
not sound).
2. Press {5}.
3. All the recorded messages will be played
back.
4
To end remote operation, hang up.
Note:
L
When the voice memory is full, 6 beeps will
sound after playing back the recorded
messages. Erase any unnecessary
messages.
sound after playing back the recorded
messages. Erase any unnecessary
messages.
8.4.2 Remote operation using
remote commands
remote commands
{
1} Repeat (During playback)
L
The current message is repeated.
L
If pressed within 5 seconds of playback, the
previous message will be played.
previous message will be played.
{
2} Skip (During playback)
L
The current message is skipped. The next
message is played.
message is played.
{
4} New message playback
L
New messages are played back.
{
5} All message playback
L
All messages are played back.
{
7} Record greeting message
L
Speak after the long beep and press {9} to
stop the operation.
stop the operation.
{
9} Stop
L
Recording of the greeting message is
stopped.
stopped.
{*}{
4} Erase a specific message (During
playback)
L
The current message is erased and the next
message will be played.
message will be played.
{*}{
5} Erase all messages
L
All recorded messages are erased.
Answering machine remote operation
1. Call your unit.
2. Enter the remote operation ID during or after
the TAM/FAX greeting message.
3. Enter a remote command within 10 seconds.
{
5}
Plays all messages
{
7}
Records greeting message
{
9}
Stops recording of the greeting
message
message
Key
Remote command
{*}{
4}
Erases a specific message
{
1}
Repeats a message
{*}{
5}
Erases all messages
{
2}
Skips a message
{
0}
Skips the greeting message
{
4}
Plays new messages
{
8}{0}
Turns OFF auto answer setting
FC238FX-PFQX2261ZA_en.book Page 63 Monday, June 20, 2005 1:30 PM