Руководство По Работе для Panasonic TX-P42GT20B

22

Timer Programming can remind you to watch a programme or record one on an external recorder or 

a USB HDD.

 select

 set

LED

LED will turn to orange if 

Timer Programming is set.

(Orange LED will flash if the recording 

of Timer Programming is in progress.)

Guide

Guide

(Timer Programming screen)

 select

 store

Ext Rec. / 

USB HDD Rec.

:  to record the programme to the external recorder (Ext Rec.) or the 

USB HDD (USB HDD Rec.)

When the start time comes, the channel will be switched automatically 

and the video and audio signals will be output. 2 mins. before the starting 

time, a reminder message appears if you are watching TV.

Reminder

:  to remind you to watch the programme

When you are watching TV, a reminder message appears 2 mins. before 

the start time. Press the OK button to switch to the programmed channel.

 

 “Timer Programming” (p. 57)

BACK/

RETURN

A confirmation screen asking whether you wish to watch or record the programme will appear.
Select “Timer Programming” and set “Ext Rec.” or “USB HDD Rec.” to record from the time you finish 

programming the timer event setting.

View

Eastender
 19:30- 20:00

Timer Programming

 select
 access

The “Timer Options” screen will be displayed to select HD or SD broadcast.

101 BBC ONE 19:30-20:00 Wed 28 Oct 2009
119 BBC HD

19:30-20:00 Wed 28 Oct 2009

Timer Options

DIY SOS

 select

 set

Guide

Guide

(Timer Programming screen)

“ ” will be displayed if HD broadcast is set.

This function is not available in Analogue mode.

●

Timer Programming can store up to 15 events.

●

Timer Programming reminder messages will remain displayed until one of the following occurs:

●

You press the OK button to view the programme or the EXIT button to cancel the reminder.

• 

The timer programming event that the reminder is set for ends.

• 

No other channel can be selected while the recording of Timer Programming is in progress.

●

When recording programmes, be sure to make the proper settings on the recorder connected to the TV.

●

If a compatible recorder with Q-Link or similar technologies is connected to the TV (p. 92) and the “Link 

Settings” (p. 38) are completed, no setting of the recorder is required. Also read the manual of the recorder.

When recording programmes to the USB HDD, be sure to register the USB HDD and enable it for recording in 

●

the “USB HDD Setup” (p. 68).