Руководство По Работе для Panasonic DP-MB350
11. Help
83
For assistance, please contact an authorized Panasonic dealer.
“
Fax in Memory”
L
The unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
104.
instructions to print out the document. For fax memory capacity, see page
104.
L
If the PC fax setting (feature #442 on page 65) is set to “
Always”,
–
check the connection between the computer and the unit.
–
check that the computer is turned ON.
L
If the fax preview mode (feature #448 on page 52) is set to “
On”,
–
view, print or save the received fax documents (page 48, 49, 52), and
then erase the unnecessary documents (page 49).
then erase the unnecessary documents (page 49).
–
turn the setting to “
Off”. The fax documents stored in memory will be
printed automatically.
–
set feature #449 (page 65) to “
On”, and then print the received fax
documents (page 49).
“
File Size Over”
L
When performing scan to FTP server, the total file size of scanned data
exceeded the file size limitation. Divide the document into sections.
exceeded the file size limitation. Divide the document into sections.
“
Keep Copying”
L
Copying has stopped due to some existing problem (Example: a lack of
recording paper or a recording paper jam). See the other displayed
message instructions to continue copying.
recording paper or a recording paper jam). See the other displayed
message instructions to continue copying.
“
Left Cover Open”
L
The left cover is open. Close it.
“
Low Temperature”
L
The inside of the unit is extremely cold and cannot be operated. Use the unit
in a warmer area.
in a warmer area.
“
Memory Full”
L
When performing memory transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
exceeded the memory capacity of the unit. Send the entire document
manually.
L
When making a copy, the document being stored exceeded the memory
capacity of the unit. Press {Stop} to clear the message. Divide the
document into sections.
capacity of the unit. Press {Stop} to clear the message. Divide the
document into sections.
“
Memory Overflow”
L
When printing a file, the document being stored exceeded the memory
capacity of the unit. Press {Stop} to clear the message. Change the printer
settings (page 28).
capacity of the unit. Press {Stop} to clear the message. Change the printer
settings (page 28).
“
Modem Error”
L
There is something wrong with the unit’s modem. Contact our service
personnel.
personnel.
“
No Fax Reply”
L
The other party’s fax machine is busy or has run out of recording paper. Try
again.
again.
“
Out of Paper Input Tray
#1”
L
Recording paper is not loaded or the paper input tray has run out of paper.
Load paper (page 14).
Load paper (page 14).
L
Recording paper was not fed into the unit properly. Load the paper again
(page 14).
(page 14).
Note:
L
“
#1”: Standard input tray
L
“
#2”: Lower input tray
L
“
#1+#2”: Standard input tray and lower input tray
“
Paper Jammed”
L
A recording paper jam occurred. See the other displayed message
instructions to remove the jammed paper (page 94).
instructions to remove the jammed paper (page 94).
“
PC Fail or Busy.”
L
The cable or the computer power cord is not connected correctly. Check the
connections (page 17, 25).
connections (page 17, 25).
L
The software is not running on the computer. Restart the software and try
again.
again.
“
Please Wait”
L
The unit is warming up. Wait for a while.
Display
Cause & Solution