Руководство По Работе для Panasonic KXFLB750NE
Sending Faxes
(32)
Sending from memory
Quick scan feature
You can scan the document into memory before
sending.
You can scan the document into memory before
sending.
1. Insert the document.
2. Enter the fax number using the dial keypad.
3. Press
{
SCAN
}
.
Transmitting reservation (Dual Access)
feature
You can scan the document even when the unit
is just receiving a fax or sending a fax from
memory.
feature
You can scan the document even when the unit
is just receiving a fax or sending a fax from
memory.
1. Insert the document during fax reception or
fax memory transmission.
2. Enter the fax number using the dial keypad,
one-touch dial or navigator directory.
3. Press
{
SCAN
}
or
{
FAX START
}
.
L
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data. If the document exceeds
the memory capacity (page 83), sending will
be cancelled. Transmit the entire document
manually.
scanned into memory. The unit will then
transmit the data. If the document exceeds
the memory capacity (page 83), sending will
be cancelled. Transmit the entire document
manually.
Note:
L
Transmitting reservation (Dual access)
feature is not available when using the
scanner glass.
feature is not available when using the
scanner glass.
To stop transmission
Press
{
STOP
}
.
Sending report for confirmation
This report will provide you with a printed record
of transmission results. To use this feature,
activate feature #04 (page 61). For the
communication message in the result column,
see page 67.
of transmission results. To use this feature,
activate feature #04 (page 61). For the
communication message in the result column,
see page 67.
Journal report
The unit stores the 30 most recent fax
communication results. To print manually, see
page 82. To print automatically after every 30
new fax communications, activate feature #22
(page 63). For the communication message in
the result column, see page 67.
communication results. To print manually, see
page 82. To print automatically after every 30
new fax communications, activate feature #22
(page 63). For the communication message in
the result column, see page 67.
Using the scanner glass
By using the scanner glass, you can send a page
from booklets or small sized paper that cannot
be sent with the auto document feeder.
Confirm that there are no documents in the
auto document feeder.
from booklets or small sized paper that cannot
be sent with the auto document feeder.
Confirm that there are no documents in the
auto document feeder.
1
Open the document cover.
2
Place the document FACE DOWN on the
scanner glass, matching the top edge of the
document to the
scanner glass, matching the top edge of the
document to the
T
mark on the unit.
3
Close the document cover.
L
If the original is a thick book, do not
close the document cover.
close the document cover.
4
If necessary, press
{
RESOLUTION
}
repeatedly to select the desired setting
(page 31).
(page 31).
5
Enter the fax number.
Example:
NO.=5678901
L
To send a single page, skip to step 9.
L
To send multiple pages, go to the next
step.
step.
6
Press
{
SCAN
}
to scan the document into
memory.
Example:
PAGES=01
01%
STANDARD
u
NEXT:PRESS SCAN
SEND:PRESS START
SEND:PRESS START
Document
cover
cover
Scanner glass
{STOP}
{RESOLUTION}
{FAX START}
{SCAN}