Руководство По Работе для Panasonic KXTG8561FX
Using SMS
SMS allows you to send and receive text
messages between other fixed-line and mobile
phones that support compatible SMS
networks and features.
Important:
R To use SMS features, you must:
messages between other fixed-line and mobile
phones that support compatible SMS
networks and features.
Important:
R To use SMS features, you must:
– subscribe to a Caller ID and/or an
appropriate service such as SMS.
– confirm that SMS is turned on.
– confirm that the correct message centre
– confirm that the correct message centre
numbers are stored.
Contact your service provider/telephone
company for details and availability.
company for details and availability.
Note:
R A total of 47 messages (at 160 characters/
R A total of 47 messages (at 160 characters/
message) can be saved. Total number may
be more than 47 if length of messages is
less than 160 characters/message.
be more than 47 if length of messages is
less than 160 characters/message.
R If the unit is connected to a PBX system,
you may not be able to use SMS features.
Turning SMS on/off
1
(middle soft key) #357
2
MbN: Select the desired setting. a
a M
a M
N
Storing SMS message
centre numbers
SMS message centre numbers must be
stored in order to send and receive SMS
messages.
For Czech:
The message centre numbers (used for SMS
services provided by Telefonica O2) are
preprogrammed in this unit. You can change
them if necessary.
For Slovakia:
The message centre numbers (used for SMS
service provided by Slovak Telecom - T-Com)
are preprogrammed in this unit. You can
change them if necessary.
stored in order to send and receive SMS
messages.
For Czech:
The message centre numbers (used for SMS
services provided by Telefonica O2) are
preprogrammed in this unit. You can change
them if necessary.
For Slovakia:
The message centre numbers (used for SMS
service provided by Slovak Telecom - T-Com)
are preprogrammed in this unit. You can
change them if necessary.
R Contact your service provider/telephone
company for more information.
R If you change the unit’s region setting/reset
the base unit, the stored message centre
numbers will be deleted or changed
(page 28). In this case, store the numbers
again if necessary.
numbers will be deleted or changed
(page 28). In this case, store the numbers
again if necessary.
1
To store “Message Centre1”:
(middle soft key) #351
To store “Message Centre2”:
(middle soft key) #352
2
Edit the number as necessary. a
a M
a M
N
Note:
R For PBX users:
R For PBX users:
– You need to add the PBX line access
number and a dialling pause to the
beginning of the Message Centre 1
number.
beginning of the Message Centre 1
number.
– If you only use the Message Centre 1
number for SMS, store the Message
Centre 1 number as is (without adding a
line access number or dialling pause) to
Message Centre 2.
Centre 1 number as is (without adding a
line access number or dialling pause) to
Message Centre 2.
Sending a message
Writing and sending a new
message
1
message
1
(middle soft key) a
a
2
MbN: “Create” a
R If “DUse Last Text?” is displayed,
R If “DUse Last Text?” is displayed,
you can use the text from the last
message you created by pressing MDN.
message you created by pressing MDN.
3
Enter a message. a
R You can change the character entry
R You can change the character entry
mode by pressing
(page 54).
4
Enter the destination phone number (20
digits max.). a
To use the redial list:
MEN (T) a MbN: Select the phone
number. a
digits max.). a
To use the redial list:
MEN (T) a MbN: Select the phone
number. a
2 times
To use the caller list:
44
SMS (Short Message Service)
TG8551_61FX_(en-en)_0427_ver021.44 44
2012/04/27 20:24:47