Инструкция для Panasonic ICX
Section 700 - Operation
Chapter 4. User Maintenance
ICX-35-700
ICX (International), March/1999
87
Hardware Requirements
•
N/A
Considerations
•
N/A
Set Mode Schedule
Description
(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page
37.)
37.)
You can set the System to automatically enter None, Day 1, Day 2, Night, Night (1), or Night (2)
modes based upon mode patterns. You can define up to 3 patterns with up to 5 modes for each day.
(This menu allows the setting of the patterns.)
modes based upon mode patterns. You can define up to 3 patterns with up to 5 modes for each day.
(This menu allows the setting of the patterns.)
Operation
To set the Mode Schedule:
7. Enter the Message Key ID code.
Notes: The ID code may contain up to 16 digits and contain
0, 1-9, *, #, pause (REDIAL key).
0, 1-9, *, #, pause (REDIAL key).
To clear an entry or existing data, press the FL/R key.
8. Press the HOLD key to store the entry.
Next extension number displays
9. To set additional Message Key ID codes, press the volume
up or down key or press the HOLD key to move to the
desired extension.
desired extension.
Desired extension number displays
10. Repeat steps 7-9 until all Message Key ID codes are set.
11. Press the MEMORY key to exit the entry mode.
MSGID - EXT Number
displays
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
key.
81-
User MAINT
displays
OR...
ON/OFF LED goes off
Action
Result
1. If not already in User Maintenance mode, enter User Main-
81-
User MAINT
displays
2. At the 81 level, enter 07.
3. Press the HOLD key.
8107-
System Mode
displays
Action
Result