Инструкция С Настройками для Panasonic NVSV121EP

!

Press PROG/CHECK, 
the Timer recording menu appears.

!

Press PROG/CHECK again or EXIT 

to quit the menu. 

The device will rewind to the beginning of the recording, 
and automatically start playing it back.

!

Press PROG PLAY.

A: If, at the beginning of a timer programme, there is not 

enough tape left to complete it, the SP/LP function will 
automatically run the tape at LP speed. This ensures that the 
entire programme will be recorded. If the LP mode is not 
enough to ‘stretch’ the remaining tape to fit, you will not be 
able to record all of the TV programmes.

D It is not possible to automatically activate the EP

 mode.

If a TV programme begins or ends earlier or later than planned, 
this function synchronises the beginning and end of the 
recording session with the actual beginning and end of the TV 
programme through a VPS signal transmitted by the TV station.

ON : The station transmits VPS/PDC signals. You must set the 

timer to the time specified in the TV magazines. Use the 
special VPS time the TV magazine may indicate.

- - - :  The station does not transmit VPS/PDC signals. Try to set 

the start and stop time such that the entire film can be 
recorded even if a programme begins or ends earlier or 
later than planned.

!

Press PROG/CHECK, 
the Timer recording menu appears.

!

With  

 select the entry you would like to edit,

confirm with ENTER.

!

Modify entries with  

 and confirm with ENTER.

!

Press RESET/CANCEL to delete a recording.