Техническое Руководство для Matrox DX002DALS9OR Fiber Optic Cable
![Matrox](https://files.manualsbrain.com/attachments/0ed950cbc98b65db071d98a8a036ebcef6a19cef/common/fit/150/50/2782b47c39710baa2f8d3fa82f1d9c1efe61eb0ebb8faabfc1ba1d2b9b42/brand_logo.jpeg)
Optical Cable Corporation reserves the right to change this specification without prior notification.
Distribution series Fiber optic cable
type oFnr riser proDuct speciFications
type oFnr riser proDuct speciFications
i/o 1
| inDoor/outDoor cables
Applications
• Indoor/outdoor tight-bound tight-buffered design allows cables to be installed
in intra-building backbone and inter-building campus locations without costly
transitions between cable types
• Ideal configuration for a single termination point requiring multiple fibers
in intra-building backbone and inter-building campus locations without costly
transitions between cable types
• Ideal configuration for a single termination point requiring multiple fibers
Features
• High performance components
and construction
• Cable materials are indoor/outdoor –
UL-listed OFNR and UV,
water and fungus resistant
• UL Listed in accordance
with NEC section 770.179(b)
and construction
• Cable materials are indoor/outdoor –
UL-listed OFNR and UV,
water and fungus resistant
• UL Listed in accordance
with NEC section 770.179(b)
for use in vertical runs in building
riser shafts or from floor to floor
• Wide operating temperature range
of -40°C to +85°C
• Helically stranded core for greater flexibility
• Wide operating temperature range
of -40°C to +85°C
• Helically stranded core for greater flexibility
and mechanical protection of the optical fibers
• High strength-to-weight ratio
• 2-144 fiber configuration is smaller and lighter
than comparable sub-grouped cables, which is
ideal for installation in areas with limited
space or tight bends
• Can be armored for additional protection in direct burial and aerial installations
• Interlocking armor can be applied to cables as an alternative to conduit installation
• High strength-to-weight ratio
• 2-144 fiber configuration is smaller and lighter
than comparable sub-grouped cables, which is
ideal for installation in areas with limited
space or tight bends
• Can be armored for additional protection in direct burial and aerial installations
• Interlocking armor can be applied to cables as an alternative to conduit installation
Cost savings
• 900 µm buffer eliminates the need for costly and time-consuming installation of
fanout kits or pigtail splices because connectors terminate directly to the fiber.
fanout kits or pigtail splices because connectors terminate directly to the fiber.
See page PI-4 for typical termination approach.
• No need to splice outdoor cable to indoor cable at building entrance
• High crush resistance may eliminate the need for innerduct
• No need to splice outdoor cable to indoor cable at building entrance
• High crush resistance may eliminate the need for innerduct
D-Series Riser
Mechanical and Environmental Performance
indoor/outdoor
Operating Temperature
-40°C to +85°C
Storage Temperature
-55°C to +85°C
Installation Temperature (cable temp.)
-10°C to +60°C
Flame Retardancy
UL Listed Type OFNR (UL 1666)
and FT4 (CSA C22.2 No. 232)
Impact Resistance:
1,500 impacts
Crush Resistance:
1,800 N/cm
Flex Resistance:
2,000 Cycles