Техническое Руководство для Cisco CATALYST 6509E 9 SLOT 15U CHASSIS NO POWER SUPPLY NO FAN TRAY
1-52
Catalyst 6500 Series Switches Installation Guide
OL-5781-04
Chapter 1 Product Overview
Catalyst 6513 Switch
Power Supply
•
Supports one or two power supplies. The following models are
supported:
supported:
–
WS-CAC-2500W (2500 W AC-input power supply).
–
WS-CDC-2500W (2500 W DC-input power supply).
–
WS-CAC-3000W (3000 W AC-input power supply).
–
WS-CAC-4000W-US (4000 W AC-input power supply).
–
WS-CAC-4000W-INT (4000 W AC-input power supply).
–
PWR-4000-DC (4000 W DC-input power supply).
–
WS-CAC-6000W (6000 W AC-input power supply).
•
Installed power supplies can be of different ratings. Installed power
supplies can also be both AC-input, both DC-input, or one AC-input and
one DC-input. Power supplies can be configured in either redundant or
non-redundant mode.
supplies can also be both AC-input, both DC-input, or one AC-input and
one DC-input. Power supplies can be configured in either redundant or
non-redundant mode.
•
All Catalyst 6500 series AC-input power supplies require single-phase
source AC. Source AC can be out of phase between multiple power
supplies or multiple AC-power plugs on the same power supply because
all AC power supply inputs are isolated.
source AC. Source AC can be out of phase between multiple power
supplies or multiple AC-power plugs on the same power supply because
all AC power supply inputs are isolated.
•
You must install a 2500 W or higher capacity power supply when using
the Supervisor Engine 32 or the Supervisor Engine 720 and the
high-speed fan tray.
the Supervisor Engine 32 or the Supervisor Engine 720 and the
high-speed fan tray.
Table 1-19
Catalyst 6513 Switch Features (continued)
Feature
Description