Техническое Руководство для Cisco 7500 SERIES ROUTE SWITCH PROCESSOR 16

This command, with the hexadecimal value 0x2102, results in the following:

Enables the system to boot the default boot ROM software if the Flash Disk-based image fails to
boot—hexadecimal value 0x2000

Disables Break—hexadecimal value 0x0100

Enables the image myfile as the default boot image—hexadecimal value 0x0002

Press Ctrl-Z or type end to exit global configuration mode:

System(config)#

System(config)# end

System#

Save the new configuration to NVRAM by using the copy running-config startup-config command as
follows:

System# copy running-config startup-config

The Flash memory (PC Card) slots on the front panel of the RSP16 support PC Card-based Flash
memory media for your system. You can use this Flash memory to store and run IOS software images,
or as a file server for other routers to access as clients. The Flash memory media for the RSP16 is Flash
Disks.

A complete discussion of PC Card-based Flash memory is beyond the scope of this publication. For
detailed information on Flash Disks, refer to

(Document Number 78-5819-xx).

Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several
ways to obtain technical assistance and other technical resources. These sections explain how to obtain
technical information from Cisco Systems.

You can access the most current Cisco documentation at this URL:

You can access the Cisco website at this URL:

You can access international Cisco websites at this URL: