Инструкции Пользователя для LG OLED55E7P

Скачать
Страница из 44
11
ENGLISH
 
• Abnormal Display
 
- If the TV feels cold to the touch, there may be a 
small flicker when it is turned on. This is normal; 
there is nothing wrong with TV. Some minute 
dot defects may be visible on the screen, 
appearing as tiny red, green, or blue spots. 
However, they have no adverse effect on the 
TV’s performance. Avoid touching the screen 
or holding your finger(s) against it for long 
periods of time. Doing so may produce some 
temporary distortion effects on the screen.
 
- This panel is an advanced product that contains 
millions of pixels. In a very few cases, you could 
see fine dots on the screen while you’re viewing 
the TV. Those dots are deactivated pixels and 
do not affect the performance and reliability 
of the TV.
 
- Displaying a still image for a prolonged period 
of time may cause an image sticking. Avoid 
displaying a fixed image on the TV screen for a 
extended length of time.
 
- Some horizontal lines may appear when the 
Pixel Refresher feature is performed. It is 
normal and there is no need to be concerned.
 
• Generated Sound
 
Cracking noise A cracking noise that occurs 
when watching or turning off the TV is 
generated by plastic thermal contraction 
due to temperature and humidity. This noise 
is common for products where thermal 
deformation is required. 
 
Electrical circuit humming/panel buzzing 
A low level noise is generated from a high-
speed switching circuit, which supplies a 
large amount of current to operate a product. 
It varies depending upon the product. 
This generated sound does not affect the 
performance and reliability of the product.
Specifications
Product specifications may be changed without 
prior notice due to upgrade of product functions.
Estimated yearly energy consumption indicated on 
the FTC label is measured in accordance with the 
Test Procedures for Television Sets (USA only).
The actual energy consumption depends on the 
usage environment (The content watched, TV 
settings, etc.).
Television System  
ATSC, NTSC-M, 64 & 256 QAM
Program Coverage 
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, 
CADTV 1-135
External Antenna Impedance 
75 Ω
Environment condition
 
• Operating Temperature  
0 °C to 40 °C (32 °F to 104 °F)
 
• Operating Humidity  
Less than 80 %
 
• Storage Temperature  
-20 °C to 60 °C (-4 °F to 140 °F)
 
• Storage Humidity  
Less than 85 %
Wireless Module (LGSBWAC72) 
Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range
Output Power (Max.)
2400 to 2483.5 MHz
5150 to 5725 MHz
5725 to 5850 MHz
15 dBm
14.5 dBm
14.5 dBm
Bluetooth
Frequency Range
Output Power (Max.)
2400 to 2483.5 MHz
8.5 dBm
 
• As band channels can vary per country, the 
user cannot change or adjust the operating 
frequency. This product is configured for the 
regional frequency table.
 
• For consideration of the user, this device should 
be installed and operated with a minimum 
distance of 20 cm (7.8 inches) between the 
device and the body. 
 
• FCC ID: BEJLGSBWAC72 / IC: 2703H-LGSBWAC72