Инструкции Пользователя для Honeywell Lyric C2 Camera

 5 

Be sure you are on the same Wi-Fi network you wish to 

connect your camera to.

Choose your Wi-Fi network from the list. Press NEXT.

Enter your Wi-Fi password, if necessary. Press DONE.

The camera will beep during some steps in this 

process, which is normal.

NEXT

NEXT

2.7-5.9 in

Enable Bluetooth on your mobile device.

The app will look for the camera.

•  For one camera, it will connect 

automatically.

•  For more than one camera, the 

app will prompt you to select one 

camera at a time. Each camera has a 

unique Media Access Control (MAC) 

ID printed on the back. The MAC ID 

is a unique identifier assigned to the 

camera. Use that ID to select the camera you want to connect. 

A QR code will display in the app as shown in the image above. To connect your 

camera to the app, hold your mobile device to display the QR code approximately 

3-6 inches (7-15 cm) from the camera lens.

The camera LED turns purple and the camera beeps 

when the mobile connection is complete.