Инструкции Пользователя для Kenwood DDX375BT
Installation and Connection
Installation and Connection
Installing the unit
Installing the unit using the mounting
bracket removed from the car
π / [
π / [
Car bracket
Note: Select the appropriate screws (supplied) for the
mounting bracket.
mounting bracket.
Installing the unit using the mounting
sleeve
(Only for DDX395)
‘
Bend the tabs of the mounting sleeve with a
screwdriver or similar utensil and attach it in place.
screwdriver or similar utensil and attach it in place.
Installing the trim plate
(Only for DDX395/DDX418BT)
]
Removing the unit
(Only for DDX395)
1
Engage the catch pins on the extraction
keys (
keys (
\
) and remove the two locks on the
lower part of the trim plate (
]
).
Catch
Lock
2
Remove from the upper two catches of
the trim plate (
the trim plate (
]
).
The frame can be removed from the top side in the
same manner.
same manner.
3
Remove the unit by inserting the two
extraction keys (
extraction keys (
\
), then pulling them as
illustrated.
\
Be careful to avoid injury from the catch pins on
the extraction key.
the extraction key.
55
ENGLISH
EN_DDX2018ST_KR.indb 55
2017/05/17 9:28