Инструкции Пользователя для Brandmotion 9002-8848

8848 Instructions 12-18-14.docx 

Page 3 of 5 

 

Step 12: Use a T20 Torx bit to remove subwoofer box. 

 

Step 13: Using a plastic trim removal tool, pry off rear 
seat belt closeout. 

Step 14: Using a plastic trim removal tool, remove rear 

access panel to expose 10mm bolt, and remove bolt.

 

Step 15: Pull out subwoofer box slightly to gain access 
to run Chassis Harness along existing harness 

Step 16: Pull back carpet and continue running Chassis 
Harness forward. 

 

Step 17: Run Chassis Harness under B-pillar cover to 
passenger door sill. Use a plastic trim removal tool to 
remove the (2) plastic push pins and remove passenger 
sill plate/kick panel. 

 

Step 18: Remove rubber bin insert from top of dash.