Инструкции Пользователя для Yamaha YSP-2700 Digital Sound Projector

PLAYBACK

➤ Wireless playback of audio via Bluetooth connection

En

Listening to music from a Bluetooth device (Receiving)

Bluetooth is selected as an input source, and 
“BLUETOOTH” is shown in the front panel display.

• If a Bluetooth device has been connected before, the unit will connect to the 

last connected device when the 

 key is pressed. Terminate this 

connection to connect a new device.

Turn on the Bluetooth function on the Bluetooth 
device.

The operation varies depending on the device. Refer to 
documentation supplied with the device.

Select “YSP-2700”* in the Bluetooth device list on 
the device.

* If the unit is registered as a MusicCast-enabled device (p. 50), the 

room name (network name) is displayed.

If a passkey (PIN) is required, enter the number “0000”.

The 

 indicator in the front panel display flashes while the 

unit and Bluetooth device are being connected, and glows 
steadily when the connection is established.

“Connect” is shown in the front panel display.

The 

 indicator or a completion message is displayed on 

the Bluetooth device.

Play back a song on the Bluetooth device.

• With some Bluetooth devices, this unit must be specified as the destination for 

audio output.

• Setting “Network Standby” in the setup menu to “On” allows the unit to be turned 

on and off with Bluetooth device operations (p. 84).

Perform one of the following operations to terminate Bluetooth 
connection.

The 

 indicator on the unit’s front panel turns off when the 

connection is terminated.

• Turn off the Bluetooth function on the Bluetooth device.

Bluetooth.

• When Bluetooth connection is terminated, “Disconnect” is shown in the front panel 

display.

BLUETOOTH

YSP-2700

PIN   0 0 0 0

1

2

3

4

5

6

7

8

9

0

Flashes while processing a 

connection

Glows when the connection 

is established

Terminating Bluetooth connection