Инструкции Пользователя для Marantz NA-11S1

7

When connecting, use a commercially available optical digital cable or coaxial digital cable.

Connect digital devices such as AV receivers and D/A 

converters with the unit to enjoy digital audio output from the 

unit.

COAXIAL

IN

OPTICAL

IN

 or 

• Digital audio output is stopped during DSD signal playback. 

• The digital audio output can be turned on/off in the “Digital 

).

n When connecting the optical digital output 

Match the shapes then insert firmly.

By connecting a computer to the USB port on the rear panel 

of this unit using a commercially available USB cable, this unit 

Computer installed with a 

media player

Plug that fits the shape of the 

connection device connector 

Type B

Type A

• Operation will not occur correctly if connected to the 

computer before the dedicated driver has been installed.

• Use a cable that is 10 ft (3 m) or less to connect to the 

computer. 

If a device equipped with CD transport or digital audio output is 

connected to this unit, this unit can be used as a D/A converter 

COAXIAL

OUT

OPTICAL

OUT

 or 

• Linear PCM signals with a sampling frequency of 32 kHz, 

44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, or 

192 kHz can be input into this device. 

• Do not input signals other than linear PCM signals, such as 

Dolby digital, DTS, AAC etc. into this device.  Doing so may 

cause noise, which may cause damage to the speakers.