Инструкции Пользователя для Marantz NA-11S1

12

Sets the language for display the menu.

• The default setting is “English”.

Turns on the Menu settings mode 

and the Menu appears on the 

display (

ui

p

 / 

 / 

When this unit is in the stop state and there is no input signal 

and operation for 30 minutes, it automatically enters the 

standby mode.

• The default setting is “On”.

Turns on the Menu settings mode 

and the Menu appears on the 

display (

ui

p

“Select Auto-Standby” menu 

appears.

ui

p

The setting is entered.

In the following situations, the Auto-Standby function does not 

operate.

• When the source is “iPod” (Direct mode) or “AirPlay”.

n Update

• In order to update the firmware, the environment and 

settings required for connecting to broadband internet are 

).

• Perform the firmware update operation after at least 2 

minutes has elapsed since turning this unit’s power ON.

Turns on the Menu settings mode 

and the Menu appears on the 

display (

ui

p

Check For Update Check for firmware updates. You can also 

check approximately how long it will take 

to complete an update.

Execute the update process.

• If updating fails, the set automatically retries, but if updating 

is still not possible, one of the messages shown below is 

displayed. If the display reads as shown below, check the 

settings and network environment, then update again.

Updating failed.

Failure to login to server.

Server is busy. Wait a while then try 

again.

Connection fail Failure in connecting to server.

Downloading of the firmware has failed.

• For details on “Quick Setup” operations, see the separate 

• If you cancelled “Quick Setup” menu or changed the