Инструкции Пользователя для Netgear AC1900 Nighthawk™

The router has status LEDs on top and a USB 3.0 port on the front.

Power

Solid amber. The router is starting.

Blinking amber. The firmware is upgrading, or the Reset button was pressed.

Solid white. The router is ready.

Blinking white. The firmware is corrupted. 

Off. Power is not supplied to the router.

Internet

Solid white. The Internet connection is ready.

Solid amber. The router has detected an Ethernet cable connection to the modem.

Blinking white. The port is sending or receiving traffic.

Off. No Ethernet cable is connected between the router and the modem.

2.4 GHz 
Wireless

Solid white. The 2.4 GHz WiFi radio is operating.

Blinking white. The router is sending or receiving WiFi traffic.

Off. The 2.4 GHz WiFi radio is off.

5 GHz Wireless

Solid white. The 5 GHz WiFi radio is operating.

Blinking white. The router is sending or receiving WiFi traffic.

Off. The 5 GHz WiFi radio is off.

USB (1 and 2)

The USB 1 LED is for the USB 3.0 USB port on the front panel. The USB 2 LED is for the USB 
2.0 port on the rear panel. 

Solid white. A USB device is connected and is ready. 

Blinking. A USB device is plugged in and is trying to connect. 

Off. No USB device is connected or someone clicked the Safely Remove Hardware 
button, and it is now safe to remove the attached USB device.