Инструкции Пользователя для Netgear AC1900 Nighthawk™

Select Internet.

In the Does your Internet connection require a login section of the page, select the 

Yes radio button.

The page adjusts.

In the Internet Service Provider list, select the encapsulation method PPPoE, PPTP, or 

L2TP.

In the Login field, enter the login name your ISP gave you. This login name is often an email 

address.

In the Password field, type the password that you use to log in to your Internet service. 

If your ISP requires a service name, type it in the Service Name (if Required) field.

In the Connection Mode drop-down list, select Always On, Dial on Demand, or Manually 

Connect.

To change the number of minutes until the Internet login times, out, in the Idle Timeout (In 

minutes) field, type the number of minutes.

This is how long the router keeps the Internet connection active when no one on the 
network is using the Internet connection. A value of 0 (zero) means never log out.

In the Internet IP Address section, select one of the following radio buttons:

Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP 
automatically assigns these addresses.

Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP 
address that your ISP assigned. The gateway is the ISP router to which your router 
connects.