Инструкции Пользователя для Tascam DR-40

Do not connect or disconnect the AC adaptor when using 

• 

phantom power. Doing so could damage this device.

Before starting recording, the input level should be adjusted 
to prevent the recorded sounds or signals from being 
distorted due to excessively large input signals or from being 
inaudible due to excessively low input signals compared to 
noise.
In addition to manual adjustment, the unit has the following 
three level adjustment functions: peak reduction, automatic 
level control, and limiter. Any of these can be used as required.

In addition to adjusting the INPUT level, try changing the 
distance and angle between the microphone and the sound 
source. The angle and distance of the microphone can also 
change the character of the recorded sound.

The following procedures explain how to use the Record 
Screen to set the levels.

Manual adjustment cannot be performed when the automatic 
level control mode is selected as a level control function  
( 

 appears to the right of the elapsed time on the 

recording screen). To enable manual input level adjustment, 
select 

OFF

 or other mode in the level control setting screen (see 

“Using the Level Control Function” on page 50).
1  Press the RECORD [0] button to begin recording 

standby.
The record indicator flashes red and the recording screen 
appears.