Инструкции Пользователя для Yamaha Pro Yamaha PSRE453 Kit
PSR-E453/PSR-EW400 Owner’s Manual
49
Re
fe
re
n
c
e
Arpeggio Settings
Synchronizing an Arpeggio to
Song/Style/Pattern Playback—
Arpeggio Quantize
Song/Style/Pattern Playback—
Arpeggio Quantize
When you play the keyboard to trigger an Arpeggio
(page 24) along with Song/Style/Pattern playback,
you’ll need to play the notes with correct timing to
keep the Arpeggio in synchronization with the other
playback tracks. However, your actual timing may be
slightly ahead of or behind the beat (or both). The
“Arpeggio Quantize” function of this instrument will
correct any slight imperfections in the timing (accord-
ing to settings below), and then play back the Arpeg-
gio appropriately.
(page 24) along with Song/Style/Pattern playback,
you’ll need to play the notes with correct timing to
keep the Arpeggio in synchronization with the other
playback tracks. However, your actual timing may be
slightly ahead of or behind the beat (or both). The
“Arpeggio Quantize” function of this instrument will
correct any slight imperfections in the timing (accord-
ing to settings below), and then play back the Arpeg-
gio appropriately.
• Synchronizing to quarter notes
• Synchronizing to 8th notes
• No synchronization
• Synchronizing to 8th notes
• No synchronization
Although the Arpeggio Quantize value is pre-pro-
grammed for each Arpeggio Type, you can change
the value manually.
grammed for each Arpeggio Type, you can change
the value manually.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [+] and [-] buttons to
call up “Quantize” (Function 046).
call up “Quantize” (Function 046).
After a few seconds, the current Arpeggio Quan-
tize value appears.
tize value appears.
3
Rotate the dial to select a value from
“OFF,” “1/8” and “1/16.”
“OFF,” “1/8” and “1/16.”
• 1/8
Synchronizing to quarter notes
• 1/16
Synchronizing to 8th notes
• OFF
No synchronization
Holding the Arpeggio Playback
via the Footswitch
via the Footswitch
You can set the instrument so that Arpeggio playback
continues even after the note has been released, by
pressing the footswitch connected to the [SUSTAIN]
jack.
continues even after the note has been released, by
pressing the footswitch connected to the [SUSTAIN]
jack.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [+] and [-] buttons to
call up “Pdl Func” (Function 047).
call up “Pdl Func” (Function 047).
After a few seconds, the current pedal setting
appears.
appears.
3
Rotate the dial to select “Arp Hold.”
If you want to restore the footswitch function to
sustain, select “Sustain.” If you want to use both
hold and sustain functions, select “Hold+Sus.”
sustain, select “Sustain.” If you want to use both
hold and sustain functions, select “Hold+Sus.”
4
Try playing Arpeggio with the foot-
switch.
switch.
Press the notes to trigger the Arpeggio, then
press the footswitch. Even if you release the
notes, Arpeggio playback will continue. To stop
Arpeggio playback, release the footswitch.
press the footswitch. Even if you release the
notes, Arpeggio playback will continue. To stop
Arpeggio playback, release the footswitch.
Quantize
046
1/8
2
046
Current value
Pdl Func
047
Sustain
1
047
Current setting
Arp Hold
2
047