Инструкции Пользователя для Sony STR-ZA5000ES

GB

The receiver can receive Dolby Atmos signals sent from a TV 

or other connected devices. Since Dolby Atmos signals from 

the TV are sent in Dolby Digital Plus format, ARC (Audio 

Return Channel)-compatible HDMI jacks must be connected 

using an HDMI cable instead of an optical digital cable.

Normally, it would be necessary to turn on the Control for 

HDMI function for both receiver and TV in order to use the 

Audio Return Channel (ARC). In this case, however, the link 

function between the receiver, TV and other devices is also 

activated. Therefore, in order to facilitate the operation of 

the controller in a custom installation (where the entire 

system is controlled via the controller), this receiver is 

designed to activate the ARC function separately, even if the 

Control for HDMI function is turned off.

As a result, Dolby Atmos-compatible content sent from the 

TV can be played back through an ARC-compatible HDMI 

jack, without the need to activate the link function using the 

Control for HDMI function.

Since the ARC function can still be used as before, Dolby 

Atmos-compatible content can be played back in high 

quality, even if the Control for HDMI function for the TV or 

connected devices is turned on.

If you use a TV compatible with Dolby Digital Plus output, 

perform the following settings on the receiver in order to 

play back Dolby Atmos-compatible content sent from the TV.

The ARC output from the TV will be enabled.

Dolby Atmos output from the TV will be enabled.

ARC signals from the TV can now be received.