Инструкции Пользователя для Bose Virtually Invisible® 891

Installing the Speakers 

1.  Trace the template in the speaker location.

 

WARNING: 

 

Do not cut into surfaces that have hazards 
 concealed behind them such as  electrical 
 wiring or plumbing. If you are unsure of your 
ability to mount this speaker, contact a 
 professional installer. 

2.  Drill a hole inside the template area large enough for your 

cutting tool.

3.  Cut along the line you traced.

4.  Remove the cutout section.

5.  Clear away any torn or rough material from around  

the hole. 

1.  Pull out at least 14 in. (36 cm) of the speaker wire.

Allow enough wire to connect the speaker from where you 
are standing. 

2.  Connect the positive wire to the red marked terminal on 

the speaker. 

Note:  The terminal marking is located on the top of  

the terminal.

Virtually Invisible® 691 speaker

3.  Connect the negative wire to the black marked terminal on 

the speaker. 

Red (positive) 
marking