Инструкции Пользователя для Yamaha CD-S3000

■ On USB connection

The tuner is too close to this unit.

Move the tuner and this unit farther apart.

—

The disc may be warped.

Replace the disc.

The output audio source setting on the connected 
component is not “PCM.”

Only PCM audio sources can be played via the 
DIGITAL IN (OPTICAL/COAXIAL) jacks of 
this unit.
Set the output audio source of the connected 
component to “PCM.”

—

The batteries of the remote control are too weak.

Replace the batteries with new ones.

Remote control is too far away or tilted too 
much.

Use within 6 m and 60° radius.

Direct sunlight or lighting (of an inverter type 
fluorescent lamp etc.) is striking the remote 
control sensor of this unit.

Reposition this unit.

The operating system of the PC is not supported.

Use a PC with an operation-guaranteed operating 
system.

Improper USB cable connection

Connect the USB cable properly.

19, 22

The output of the PC or application is muted.

Cancel the sound muting of the PC or 
application.

—

Another application is launched on the PC while 
a music file is being played.

If another application is launched while a music 
file is being played, sound may be momentarily 
lost or noise may be generated.
Do not launch other applications during 
playback.

—

The music data are not properly reproduced, 
because this unit is connected to the PC or the 
input of this unit is switched to “USB” while the 
music application is running on the PC.

Connect this unit to the PC and set the input of 
the unit to “USB” in advance. Then launch the 
music application and start playback.

The dedicated “Yamaha Steinberg USB Driver” 
has not been installed correctly.

Install the “Yamaha Steinberg USB Driver” 
again, following the correct procedure.