Инструкции Пользователя для Oppo UDP-203
S E T U P M E N U O P T I O N S
62
Audio Processing Setup
The Audio Processing section of the Setup Menu allows you to configure how the player will process audio
signals before sending them to the output. In this section, all of the settings only affect the analog audio
outputs, except for Dynamic Range Control (DRC), which also affects HDMI audio.
signals before sending them to the output. In this section, all of the settings only affect the analog audio
outputs, except for Dynamic Range Control (DRC), which also affects HDMI audio.
1. Output Volume: Allows you to enable or disable the analog volume controls (also known as
Variable Audio). The available options are:
Variable (default)
– Enables the analog volume control. Use the VOL+/- buttons on the remote
to decrease/increase the analog audio output level (the maximum is 100).
Fixed
– Disables the analog volume control. The VOL+/- buttons on the remote will no longer
affect the analog audio output, and the volume level is fixed to 100.
2.
Power On Volume:
Allows you to set the initial audio volume level after power on. This option will
be applied to the stereo and 7.1 audio outputs.
Last (default)
– Power on with the previous volume level before the player was turned off. This
choice is recommended for regular use.
40 (custom)
– Power on with your preferred volume level. You may use the LEFT/RIGHT
ARROW buttons on the remote to decrease/increase the volume level. The default level is 40.
3. Maximum Volume: Allows you to set the maximum volume level. This option will be applied to the
stereo and 7.1audio outputs. You may use the LEFT/RIGHT ARROW buttons on the remote to
decrease/increase the volume level. The default value is 100.
decrease/increase the volume level. The default value is 100.
4. Dynamic Range Control: Allows you to set the Dynamic Range Compression (DRC). DRC can
smooth out the sonic peaks and valleys common with wide-range digital audio. Enabling DRC may
make low level audio more audible during low-level listening. Turning off DRC restores the sonic
energy present in the original recording.
make low level audio more audible during low-level listening. Turning off DRC restores the sonic
energy present in the original recording.
Auto
(default)
– Plays at the dynamic range specified by the disc. This option applies to certain
Blu-ray Discs only, which have DRC instructions encoded in the Dolby TrueHD audio tracks.
On
– Turn on DRC for all Dolby and DTS audio formats. This option applies to all DVD and Blu-
ray Discs.
Off
– Turn off DRC.