Инструкции Пользователя для Oppo UDP-203
77
No color
Saturation set too low
Check the saturation setting on TV and player.
Incorrect color
Incorrect color space
setting
setting
If using HDMI for video output, check the color
space setting on the TV and player.
space setting on the TV and player.
“No Disc” or
“Unknown Disc”
error
“Unknown Disc”
error
No disc or incompatible
disc loaded in player
disc loaded in player
Eject disc and check.
Dirty disc recording surface
Eject the disc and clean any dirt or fingerprints.
Disc not properly loaded
Eject disc and make sure the label side is facing
up and the record side is facing down.
up and the record side is facing down.
Condensation on the laser
pick-up head
pick-up head
Turn on the player, eject the disc and leave the
player on for about an hour.
player on for about an hour.
Remote control
failure
failure
Remote control is out of
range
range
Use the remote control within the effective range. 9
Low battery
Replace the batteries
Incorrect remote control
code
code
Open the disc tray. Aim the remote at the player.
Press and hold the ENTER button on the remote
for 5 seconds to set the remote code.
Press and hold the ENTER button on the remote
for 5 seconds to set the remote code.
Temporary
function failure
function failure
Scratched or damaged disc
is used
is used
Replace the disc.
Some functions are not
available during playback
available during playback
Stop playback completely, then try again.
Interference from other
devices
devices
Identify interference by turning off other devices,
and then relocate or replace the offending device
and then relocate or replace the offending device
Some Setup Menu
items are grayed
out
items are grayed
out
Some setup options cannot
be changed while a disc is
playing. Some setup
options may be mutually
exclusive with other setup
options.
be changed while a disc is
playing. Some setup
options may be mutually
exclusive with other setup
options.
Fully stop playback, eject the disc and try the
Setup Menu again.
Setup Menu again.
“Connection Test”
fails
fails
No internet connection.
Verify that your router has a connection to the
internet. Try power cycling the modem and
router. Try a direct Ethernet connection if
possible.
internet. Try power cycling the modem and
router. Try a direct Ethernet connection if
possible.
“Network” shows
no server
no server
No network connection.
Media server not properly
configured. Connected to
wrong network.
Media server not properly
configured. Connected to
wrong network.
Verify that other network features are functional
on the device. If the network issues are isolated
to the “Network” feature, consult your media
server’s documentation to ensure proper
configuration.
on the device. If the network issues are isolated
to the “Network” feature, consult your media
server’s documentation to ensure proper
configuration.