Руководство Пользователя для Canon Powershot A30
160
Problem
Cause
Solution
When flash is used, the
distance between lens
and subject should be
no less than 26 cm
(10.2 in.).
distance between lens
and subject should be
no less than 26 cm
(10.2 in.).
Set exposure
compensation to a
negative value.
compensation to a
negative value.
Adjust the camera
angle.
angle.
Set the flash to any
other mode except On.
other mode except On.
Set the flash to any
other mode except Off.
other mode except Off.
Set the video system to
the appropriate setting,
NTSC or PAL, for your
TV. Or, use spot AE
point light metering.
the appropriate setting,
NTSC or PAL, for your
TV. Or, use spot AE
point light metering.
Turn the mode dial to
any mode other than
any mode other than
.
Operate the zoom
before shooting in
movie mode.
before shooting in
movie mode.
The subject is too
close to the flash.
close to the flash.
The subject is br ighter
than the surroundings .
than the surroundings .
Light is shining or
reflecting into the
camera.
reflecting into the
camera.
The flash mode is set so
that the flash always fires.
that the flash always fires.
The flash mode is set
to Off.
to Off.
Incorrect video system
setting.
setting.
The mode dial is
turned to
turned to
(stitch
assist).
Zoom button was
pressed while shooting
in movie mode.
pressed while shooting
in movie mode.
The subject
comes out
overexposed
(too bright).
comes out
overexposed
(too bright).
The flash
doesn’t fire.
doesn’t fire.
Image not
showing on
TV.
showing on
TV.
Zoom does
not operate.
not operate.