Инструкция С Настройками для Nikon Fisheye Nikkor 8 mm f/ 2.8 Lens

JAA79201-R.3669.A

- Ｔ3 ･ AF-S DX18-55/3.5-5.6G -

Making of self-made tool

Connector

Use this range.

Main PCB

ＧＮＤ

ＶＣＣ（５．

０Ｖ）

ＭＲ－Ａ

ＭＲ－Ｂ

①

Remove the elements (condenser, transistor,

　

 IC, etc.) installed within the dotted line as

　

 shown in the left from both sides of PCB.

　

 Don’t remove the connector.

②

Cut the PCB at the dotted line.

③

Solder the cords at 4 pattern places on the

　

 PCB as shown in the left.

●

It is necessary to make a self-made tool by using the RP main PCB of AF-S 24-85/3.5-4.5G.  The self-made tool  

     will be used for "INSPECTION AND ADJUSTMENT FOR THE WAVEFORM OUTPUT FROM MR  
     ENCODER".
　 

The making procedure is shown below.  Make a self-made tool according to this procedure.