Справочник Пользователя для Pro-Ject Speaker Box 5 3081010010
Модели
3081010010
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
38
Pro-Ject RPM 6.1 SB
Manual turntable with
electronic speed change
electronic speed change
Product information
Turntable
A quiet running AC motor with a two-step pulley drives the acrylic hub and platter via a flat-ground belt.
The medium density fibre plinth stands on three height-adjustable Sorbothane
®
-damped aluminium cones.
The motor is decoupled from the plinth to reduce vibration transmission.
The resonance-optimised platter is a sandwich construction utilising the hub, an medium density fibre
platter, a 4mm thick flat-ground layer of vinyl and a brass record puck.
The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.
Electronic speed change for 33/45 r.p.m.. Switching to 78 r.p.m. is done manually.
Central metal block optimises centre of gravity and damps main bearing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through the
gold plated phono sockets and earth screw. A standard cable is provided.
gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 9c
Conical carbon-fibre armtube avoids standing wave reflections.
Low mass aluminium headshell securely glued to armtube.
The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.
Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
Design of counterweight effectively counteracts unwanted resonances.
The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for
cartridges weighing between 10 - 15g, 9 - 11g or 4 - 6g are available as an accessory part.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing
warped records.
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
phono sockets.
Dimensions W x H x D: 385 x 170 x 330mm. Dust cover Cover it optional. W x H x D: 460 x 225 x 365mm.
The manufacturer reserves the right to alter the technical specifications without notice.