Листовка для Lantronix XPress-DR-IAP XSDRIN-02
Модели
XSDRIN-02
15353 Barranca Parkway
|
Irvine
|
CA 92618
|
USA
|
Tel: 800.422.7055
|
Fax: 949.450.7232
|
www.lantronix.com
©2007, Lantronix, Inc. Lantronix is a registered trademark and Device Server is a trademark of Lantronix, Inc. All other trademarks are the property of their respective owners. Specifications subject to change
without notice. All rights reserved. 910-394 05/07 DGS2500
without notice. All rights reserved. 910-394 05/07 DGS2500
Features
Serial Interface
Interface: RS-232, RS-422, or RS-485
Connector: Screw terminals or RJ45
Data Rates: 300 to 115,200 bps
Characters: 7 or 8 data bits
Parity: odd, even, none
Stop Bits: 1 or 2
Flow Control:
Software: XON/XOFF
Hardware: RTS/CTS
Installable Serial Protocols (XPress DR-IAP only)
Connector: Screw terminals or RJ45
Data Rates: 300 to 115,200 bps
Characters: 7 or 8 data bits
Parity: odd, even, none
Stop Bits: 1 or 2
Flow Control:
Software: XON/XOFF
Hardware: RTS/CTS
Installable Serial Protocols (XPress DR-IAP only)
Network Interface
Standards: ARP, UDP/IP, TCP/IP, ICMP, SNMP, BOOTP,
DHCP, TFTP, Telnet, and HTTP
Interface: 10Base-T/100Base-TX Ethernet
Connector: RJ45
Installable application layer protocols (XPress DR-IAP only)
DHCP, TFTP, Telnet, and HTTP
Interface: 10Base-T/100Base-TX Ethernet
Connector: RJ45
Installable application layer protocols (XPress DR-IAP only)
Indicators
Ready, Fault/Configuration, Activity, Link,
Serial Transmit Data, Serial Receive Data
Serial Transmit Data, Serial Receive Data
Management
SNMP, serial, Telnet, and HTTP (web browser)
Isolation
Ethernet: 1500 Vrms
Serial: 2000 Vrms
Serial: 2000 Vrms
Power
Input: 9 to 30VDC/9-24VAC, 3W maximum
Connector: Screw terminals for power and ground
Connector: Screw terminals for power and ground
Environmental (Operating)
Temperature: 0° to 60°C (32° to 140°F)
Humidity: 20% to 90% RH, non-condensing
Humidity: 20% to 90% RH, non-condensing
Packaging
Mounting: DIN-rail (35 mm)
Material: High-impact plastic
Dimensions: 60 x 36 x 90 mm (2.4 x 1.4 x 3.54 in)
Material: High-impact plastic
Dimensions: 60 x 36 x 90 mm (2.4 x 1.4 x 3.54 in)
Agency Approvals
UL, CSA, TUV, FCC, CE, FM Class I, Div. 2
Warranty
1-year limited warranty
Software
Included Windows® 95/98/ME/NT/2000-based configuration
software simplifies initial setup
Shipping Dimensions (L x W x H)
Part Numbers
187.3 x 228.6 x 111 mm (7.375 x 9.0 x 4.375 in)
XSDRSN-02 XPress-DR: standard part
XSDRIN-02 XPress-DR-IAP with installable industrial protocols
XSDRIN-02 XPress-DR-IAP with installable industrial protocols
Industrial Device Server, DIN-rail mounting, serial interface (RS-232,RS-422,RS-485 – terminal block or RJ45),
10Base-T/100Base-TX Ethernet, diagnostic LEDs, 9VDC to 30VDC power input, CD-ROM with configuration
tools, installable communication drivers, and Installation Guide.
10Base-T/100Base-TX Ethernet, diagnostic LEDs, 9VDC to 30VDC power input, CD-ROM with configuration
tools, installable communication drivers, and Installation Guide.
Example Configurations
90 mm
(3.54 in)
Dinrail Mount
35 mm
(1.4 in)
(1.4 in)
Programmable Logic Controller
(PLC)
Variable Speed Drive
Ethernet
RS-232/485
RS-232/485
Personal Computer (PC) without
Ethernet adapter
Programmable Logic Controller
(PLC)
Variable Speed Drive
Ethernet
RS-232/485
RS-232/485
Personal Computer (PC) with
installed Ethernet adapter
RS-232 or RS-422/485
RS-232 or RS-422/485
9-30 VDC/9-24 VAC
10Base-T/100Base-TX Ethernet
Note: Serial connections may be attached
to either the terminal block or to the RJ45
connector – but not both simultaneously.
Master/Slave Application
Industrial Device Serv
ers
™
XPress DR/Xpress DR-IAP