Справочник Пользователя для Intertex Data AB IX78

- 4 - 

I can’t find “Network Connections”! Why? You 
need a network card installed in your computer. 
Configure it according to the instructions from the 
manufacturer. 

Note: 

•  The Ethernet port ET4 is a subnet completely separate from the other subnets. It can be used as 

a DMZ for a secure connection of e.g. servers or an Internet connection instead of ADSL. 

•  The USB port is an option only available one some ADSL Internet Gate models. 

The ADSL Internet Gate is delivered with factory defaults that fit most users. If your PC has the default 
network and web settings, then everything should work at once. If not, please check your PC’s settings. 

(The steps described here are for Windows XP. Other operating systems have similar menus and 
options, though accessing them may be done differently.) 

•  Select Network Connections in Windows Control Panel 

(click Start and choose Control Panel). Right click on the 
network connection that you use and select 
Properties. 

•  Double click on Internet Protocol (TCP/IP) for your 

network card on the list that appears. 

 

There are two ways to address computers in a local network (LAN): 

a) Either 

Dynamic IP addressing, a DHCP server on the LAN distributes IP addresses to all 

connected computers, 

b) or 

Static IP addressing, all connected computers use a manually assigned IP address. 

There is no ”Internet Protocol (TCP/IP)” in the 
list! Why? It is not installed. 
Select ”Install”, ”Protocol”, “Add”, ”Microsoft