Справочник Пользователя для Comp X Security Products Inc TP-100
StealthLock, Keyless Invisible Security
17
Clear User Pin Code
This feature returns the user code back the factory default setting of 0000. It does not
reset any other mode or feature of the lock.
There is a 60 second programming time limit to each step. If you time out or make an
error, programming will end and you will need to restart from step 1.
This feature returns the user code back the factory default setting of 0000. It does not
reset any other mode or feature of the lock.
There is a 60 second programming time limit to each step. If you time out or make an
error, programming will end and you will need to restart from step 1.
1.
We suggest reading through instructions prior to beginning programming
2.
Press and hold the Receiver Latch learn button until the yellow LED begins a
three blink pattern
three blink pattern
3.
Enter the Supervisor pin code and press the Unlock
button
4.
Enter 8888 and press the Lock
button
5.
If successful the green LED will flash twice on the Receiver Latch
6.
Continue programming or enter 9999 followed by pressing the Lock
button to exit Learn Mode
7.
Test lock function to make sure user default setting is restored. Lock can now
be programmed with a new user code
be programmed with a new user code
StealthLock, Keyless Invisible Security
18
Auxiliary Power
(Available June 2010)
If desired, the StealthLock
Receiver Latch may be
connected to 120 VAC power
using the optional RL-AP1
Power Supply
Receiver Latch may be
connected to 120 VAC power
using the optional RL-AP1
Power Supply
Up to 10 Receiver Latches may
be powered from the same
Power Supply using the optional
RL-APC Power Cords as shown
be powered from the same
Power Supply using the optional
RL-APC Power Cords as shown
RL-APC
Power Cords
Power Cords
RL-AP1
Power Supply
Power Supply
RL-AP1 Power Supply
RL-APC-3 Power Cord – 3 foot
RL-APC-5 Power Cord – 5 foot
RL-APC-10 Power Cord – 10 foot
RL-APC-5 Power Cord – 5 foot
RL-APC-10 Power Cord – 10 foot